Ford Taurus SHO Stage III Dyno Chart - 233 HP / 199.9 ft-lbs (SHO Shop Dynojet)

This document is a chassis dynamometer test printout (dyno chart) produced by the SHO Shop of Huntington Beach, California, measured on a Dynojet Model 248C dynamometer. The run is labeled "DYNORUN.006 - 94, Stage III, +f". The chart plots two curves against engine speed (RPM x1000, from roughly 2,300 to 7,000 RPM): actual horsepower (green line, left axis) and actual torque in ft-lbs (black line, right axis), both scaled 0–250. Recorded test conditions were 65.0 °F ambient temperature, barometric pressure of 29.66-0.32 in.Hg, 50 ft elevation, and an RPM/MPH ratio of 70. The results show a maximum power of 233.0 horsepower and maximum torque of 199.9 ft-lbs. The torque curve is broad and flat, holding near 190–200 ft-lbs from roughly 2,700 RPM through about 6,000 RPM, while horsepower climbs steadily to a peak of about 233 near 6,300–6,500 RPM. The printout includes the shop's address (15608 Graham St., Huntington Beach, CA) and phone number (714) 894-8415. The uploader associates this with a 1993 Ford Taurus (SHO), with the run label referencing "94" and a "Stage III" modification level.