Home/
Registry/
Ford/
Bronco/
1980-1986/
“That dirty old truck”/
Photo
supermotors.net/registry/media/1168557
Repainted 4.9L Parts IF THE IMAGE IS TOO SMALL, click it. When…
![Repainted 4.9L Parts
IF THE IMAGE IS TOO SMALL, click it.
When I take parts off, I usually wash, sandblast, & repaint them factory colors more-thoroughly than the factory did using DupliColor Engine Ceramic Paints. For the debossments, I then run a belt sander over them to remove the paint, and apply clear to keep them shiny. The Ford oval on the 4.9L plenum must be protected with masking tape since it's a stamped emblem glued to the plenum & can't be belt-sanded or removed.
[url=https://www.amazon.com/dp/B001DKJSO0]New Ford Gray DE1611[/url]
[url=https://www.amazon.com/dp/B00296CJGQ]Aluminum Cast Coat DE1650[/url]
[url=https://www.amazon.com/dp/B000GKEXW0]Clear DE1636[/url]
[url=https://www.amazon.com/dp/B000GKEXVQ]SemiGloss Black DE1635[/url]
[url=https://www.amazon.com/dp/B000B68V90]Gloss Black DE1613[/url]](https://www.supermotors.net/getfile/1168557/fullsize/49lrepaint.jpg)
Repainted 4.9L Parts
IF THE IMAGE IS TOO SMALL, click it.
When I take parts off, I usually wash, sandblast, & repaint them factory colors more-thoroughly than the factory did using DupliColor Engine Ceramic Paints. For the debossments, I then run a belt sander over them to remove the paint, and apply clear to keep them shiny. The Ford oval on the 4.9L plenum must be protected with masking tape since it's a stamped emblem glued to the plenum & can't be belt-sanded or removed.
New Ford Gray DE1611
Aluminum Cast Coat DE1650
Clear DE1636
SemiGloss Black DE1635
Gloss Black DE1613
Is this accurate? Sign in to help verify it.
Comments
More from this build
No comments yet.