Home/
Registry/
Ford/
Bronco/
1980-1986/
“That dirty old truck”/
Photo
supermotors.net/registry/media/1172058
Water Pump Re-Gasket IF THE IMAGE IS TOO SMALL, click it. Th…
![Water Pump Re-Gasket
IF THE IMAGE IS TOO SMALL, click it.
This truck's water pump wasn't leaking, but its gaskets were. So instead of replacing a good pump with a cheapo or a $100 [url=https://www.amazon.com/dp/B000C5HQW8]Motorcraft PW254[/url], only about $10 of gaskets were replaced ([url=https://www.amazon.com/dp/B007DKPDQQ]Mahle JV1034[/url]) using [url=https://www.amazon.com/dp/B0008KLOG6]Permatex 20539[/url] around the coolant journals. Since this is a '96, it has a misfire detector, and the conduit for those wires was jammed on a stud, causing a backup wrench to be needed for removal. The bolts were sandblasted, painted, & reused. The thermostat was also replaced as preventative maintenance, and the alternator bolt tab was welded back onto the heater return pipe.](https://www.supermotors.net/getfile/1172058/original/waterpump.jpg)
General Purpose PicsView all 430
Water Pump Re-Gasket
IF THE IMAGE IS TOO SMALL, click it.
This truck's water pump wasn't leaking, but its gaskets were. So instead of replacing a good pump with a cheapo or a $100 Motorcraft PW254, only about $10 of gaskets were replaced (Mahle JV1034) using Permatex 20539 around the coolant journals. Since this is a '96, it has a misfire detector, and the conduit for those wires was jammed on a stud, causing a backup wrench to be needed for removal. The bolts were sandblasted, painted, & reused. The thermostat was also replaced as preventative maintenance, and the alternator bolt tab was welded back onto the heater return pipe.
Is this accurate? Sign in to help verify it.
No comments yet.