as. .Highirw'selbldlivlrontm ontid) . I my 3. Lubricate clutch drum bushing, and install inner seal and piston seal as illustrated. Be careful not to stretch seals dUring installation. I Never assemble clutch dry; always lubricate its components thoroughly. O Always install piston seal in direction shown in figure below High-reverse Forward clutch (Front) . clutch drum [Rearl SATJIE 4. Assemble piston, being careful not to allow seal to kink or become damaged during installation, After installing, turn piston by hand to ensure that there is no binding / sATaw 5i Rememble springs and retainer. Reinstall snap ringi Be sure snap ring is properly seatedl $T2542000 lJZSOGZ-Al sATau 6. Install driven plates, drive plates. and secure with snap ring. SATJ" AT-30