1. Lubricate outer diameter part of oil pump as- sernbly. Install oil pump assembly and thrust bearing. After installing piston retainer, make sure that its piston seal is not turned over by the application of air pressure to low and reverse brake circuit. 2, Lubricate low and reverse brake piston seal then install piston by tapping it evenly using a wooden block. swam 3. lnstall low and reverse brake piston retainer. 7 . 9 N-m (0.7 - 0.9 kw", s.i 65 'I-lh] snnas 4. Install parking pawl, return spring and parking pawl shaft. Parklng pawl shaft 5. Install brake band. \/L SAY280 AT-45