Dynojet Dyno Run Sheet 213 HP - Race Related 2006 (1985 Crown Victoria)

This document is a Dynojet Research chassis dynamometer run sheet printed by "Race Related" (phone 727-561-9440). It plots Power (hp) and Torque (ft-lbs) against roller speed (mph) from roughly 35 to 106 mph, with a secondary graph of Air/Fuel ratio below. Marked cursor values at X = 94.9 mph show 207.44 hp, 28.28 ft-lbs torque, and a 14.08:1 air/fuel ratio. The footer records the run file (RunFile_001.drf) dated 9/16/2006 at 1:27:54 PM, run type RO, and test conditions of 101.46 °F, 30.20 in-Hg barometric pressure, 16% humidity, with an STD correction factor of 1.02 and smoothing of 5. Peak results are stated as Max Power = 213.33 hp and Max Torque = 32.16 ft-lbs. The power curve climbs steeply from about 35 mph, flattening near 200+ hp above 60 mph and holding to roughly 106 mph; the air/fuel trace stays near 13–14.5 across the pull. The very low torque figure (32 ft-lbs at over 200 hp) suggests the torque axis reading reflects roller/drum torque rather than engine torque. The sheet contains no vehicle identification, so its association with a 1985 Ford LTD Crown Victoria comes only from the uploader.