What does this schematic show?

It shows a rear suspension layout with the frame rails, rear axle, and leaf springs, with arrows marking four 'connects here' attachment points.

Why is the spring setup drawn as three pieces?

The diagram notes that the '3 peice design allows for both sides to flex,' meaning each side of the suspension can articulate independently.

Where do the springs connect according to the diagram?

Arrows labeled 'connects here' point to mounting points on both frame rails and at the ends near the rear axle on each side — four connection points total.

Does the diagram include measurements or part numbers?

No. It contains only labeled callouts (frame, rear axle, leaf springs, connects here) and a design note; there are no dimensions, part numbers, or torque values.

Home/ Registry/ Ford/ Bronco II/ 1984-1990/ “Whitey”/ Photo supermotors.net/registry/media/244676

Ford Bronco II Rear Leaf Spring Z-Spring Schematic - 3-Piece Flex Design Diagram

Rear suspension schematic showing frame, rear axle and leaf springs with connection callouts

‹ ›

Schematic of a three-piece rear suspension showing frame rails, rear axle and leaf springs with connection points allowing both sides to flex.

AI caption September 2005 · Photo 35 of 125

This document is a simple hand-drawn schematic illustrating a rear suspension concept for a vehicle, showing two frame rails viewed from below/in perspective with a rear axle and leaf springs. Labeled callouts identify the 'frame' (both rails), the 'rear axle' (drawn with a differential housing in the center), and the 'leaf springs' arranged in a Z- or arc-style configuration. Four separate 'connects here' arrows indicate the attachment points where the spring assembly mounts to the frame rails and to the axle/shackle points on each side. A note reads '3 peice design allows for both sides to flex' (sic), explaining that the three-piece spring/linkage layout permits independent articulation of the left and right sides. The drawing contains no part numbers, dimensions, torque specifications, year/model identification, or manufacturer text — it is purely a conceptual diagram showing how the multi-piece leaf spring arrangement connects between the frame and rear axle. A reader can learn the general mounting locations and the design rationale (allowing both sides to flex) but no fabrication measurements or hardware details. It was uploaded to a 1984 Ford Bronco II gallery, though the drawing itself does not state any vehicle applicability.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What does this schematic show?: It shows a rear suspension layout with the frame rails, rear axle, and leaf springs, with arrows marking four 'connects here' attachment points.
Why is the spring setup drawn as three pieces?: The diagram notes that the '3 peice design allows for both sides to flex,' meaning each side of the suspension can articulate independently.
Where do the springs connect according to the diagram?: Arrows labeled 'connects here' point to mounting points on both frame rails and at the ends near the rear axle on each side — four connection points total.
Does the diagram include measurements or part numbers?: No. It contains only labeled callouts (frame, rear axle, leaf springs, connects here) and a design note; there are no dimensions, part numbers, or torque values.