What does this diagram show?

It is a simple schematic sketch of an exhaust path, showing a component (engine/muffler area) at top, a driveline leading to the rear axle with wheels, and an exhaust pipe branching to the side with a downward-angled tip.

Where does the exhaust exit in this plan?

The exhaust pipe angles off to the right side of the drawing and ends in front of/beside the rear wheel with a 'turn down' at the tip, as labeled by the arrow.

Does the diagram include any measurements or part numbers?

No. The only text visible in the document is the callout 'turn down'; there are no dimensions, part numbers, or specifications.

What does the 'turn down' label mean in the sketch?

It points to the end of the exhaust pipe, indicating the pipe tip is turned downward at its exit point near the rear axle.

Home/ Registry/ Ford/ Bronco II/ 1984-1990/ “Whitey”/ Photo supermotors.net/registry/media/254985

1984 Ford Bronco II Exhaust Path Diagram - Turn-Down Exit Routing Sketch

Exhaust routing schematic from engine down through chassis with a turn-down outlet

‹ ›

Schematic showing exhaust routing from the engine down through the chassis to a turn-down outlet.

AI caption October 2005 · Photo 36 of 125

This document is a simple hand-drawn schematic diagram, apparently illustrating a planned exhaust routing on a vehicle (uploaded as "exhaust path.jpg" for a 1984 Ford Bronco II). Viewed from above or behind, the drawing shows a large shaded rectangular component at the top (likely the engine/transmission or fuel tank area) with what appear to be bracket or hanger marks on either side. From this component, a tapered section (resembling a muffler or transmission tailpiece) leads down to a thin vertical line running toward a rear axle, which is drawn at the bottom with two wheels/tires and a differential housing at its center. A separate thick black line branches off to the right side of the drawing, angling downward and outward past the axle line; this is labeled with an arrow and the text "turn down," indicating the exhaust pipe is intended to exit with a downward-turned tip ahead of or beside the rear wheel. The only legible text in the entire document is the callout "turn down." There are no part numbers, dimensions, torque specs, or year/model markings visible. A reader learns the general intended exhaust exit location and orientation (a turn-down before the rear tire) but no specific measurements or parts.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What does this diagram show?: It is a simple schematic sketch of an exhaust path, showing a component (engine/muffler area) at top, a driveline leading to the rear axle with wheels, and an exhaust pipe branching to the side with a downward-angled tip.
Where does the exhaust exit in this plan?: The exhaust pipe angles off to the right side of the drawing and ends in front of/beside the rear wheel with a 'turn down' at the tip, as labeled by the arrow.
Does the diagram include any measurements or part numbers?: No. The only text visible in the document is the callout 'turn down'; there are no dimensions, part numbers, or specifications.
What does the 'turn down' label mean in the sketch?: It points to the end of the exhaust pipe, indicating the pipe tip is turned downward at its exit point near the rear axle.