What measurement is shown in the headlamp diagram?

The diagram shows a dimension of 19.05 mm (0.75 in), associated with the retention points identified by callout 1 at the top of the headlamp opening.

What do the numbered callouts in the diagram indicate?

Callout 1 points to two retention tabs/locators at the top of the headlamp opening, callout 2 points to the electrical connector/wiring at the rear of the headlamp, and callout 3 points to the headlamp assembly itself.

Does the diagram show how the headlamp electrical connector is located?

Yes, callout 2 identifies the wiring harness and connector that attach to the back of the headlamp assembly in the headlamp opening.

Is there a figure reference number on this illustration?

Yes, the illustration is identified by the code GN0906-A in the lower right corner.

Home/ Registry/ Ford/ Mustang/ 2005-2014/ “SHELBY GT500”/ Photo supermotors.net/registry/media/665954

Ford Headlamp Assembly Removal & Installation Diagram - Service Illustration

Headlamp assembly removal drawing with numbered callouts and a 19.05 mm dimension

‹ ›

Service procedure figure showing headlamp assembly with numbered callouts and a 19.05 mm (0.75 in) reference dimension.

AI caption August 2008 · Photo 408 of 4867

This document is a single exploded-view service illustration showing the removal or installation of a headlamp assembly. The line drawing depicts the front corner structure of the vehicle (radiator support / front fascia area) with the headlamp assembly (callout 3) pulled away from its mounting location. Callout 1 identifies two retention points or tabs at the top of the headlamp opening, with an accompanying dimension of 19.05 mm (0.75 in) noted in a box, presumably a clearance or engagement measurement related to those retainers. Callout 2 points to the wiring harness and electrical connector that attaches to the back of the headlamp bulb. The figure is identified by the illustration code GN0906-A. There is no legend table, torque specifications, part numbers, or text describing the numbered steps on this page, so the reader learns the physical relationship of the headlamp assembly to its mounting points and connector, plus the single 19.05 mm dimension. It appears to be one illustration extracted from a multi-page factory service procedure; the surrounding procedural text is not included in this scan.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What measurement is shown in the headlamp diagram?: The diagram shows a dimension of 19.05 mm (0.75 in), associated with the retention points identified by callout 1 at the top of the headlamp opening.
What do the numbered callouts in the diagram indicate?: Callout 1 points to two retention tabs/locators at the top of the headlamp opening, callout 2 points to the electrical connector/wiring at the rear of the headlamp, and callout 3 points to the headlamp assembly itself.
Does the diagram show how the headlamp electrical connector is located?: Yes, callout 2 identifies the wiring harness and connector that attach to the back of the headlamp assembly in the headlamp opening.
Is there a figure reference number on this illustration?: Yes, the illustration is identified by the code GN0906-A in the lower right corner.