1978 Ford Bronco Fabrication Sketch - 3/16" Steel Plate Bracket Templates & Cut List

This document is a hand-drawn fabrication sketch (blueprint-style) photographed from paper, uploaded to a 1978 Ford Bronco gallery. It is explicitly noted as "all 3/16" plate, Not to Scale." The sketch shows two plate templates, each marked "2 of" (quantity two each). The left template is a rectangular plate 5" wide by 9" tall with a 1" hole located 1.5" from the bottom edge and 1.5" from the right edge. The right template is a shorter plate, 5" wide with a height dimension that appears to read 4 1/2", also with a hole positioned 1.5" from each of two adjacent edges. Below the diagrams is a materials cut list: two pieces of 3" x 5" x 3/16" strap, two pieces of 3" x 4" x 3/16" strap, and 30" of 2" x 3/16" angle iron. The document contains no vehicle-specific labels, part numbers, or dates, so its exact application (likely a bracket or mount fabrication project for the owner's Bronco) is not stated on the page itself. A reader can learn the plate dimensions, hole locations, and total steel stock needed to reproduce the parts.