Data & Spec Plates: Ford Bronco 1992-1996

Technical Reference

Member-uploaded diagrams & documents for this generation. AI-classified; community-verified where badged.

Data/Spec Plates

• 1994 Ford Bronco Door Data Spec Plate - VIN, GVWR, Axle & Paint Codes
  This document is a photograph of the factory Safety Compliance Certification Label (data/spec plate) affixed to a Ford vehicle, manufactured by Ford Motor Co. in the U.S.A. with a build date of 01/94. It lists a Gross…
• 1994 Ford Bronco Special Paint Code Label - M# 6373, Sales/Paint Code UA
  This is a photograph of a factory Ford "Special Paint" decal/sticker affixed to a vehicle, uploaded to document a 1994 Ford Bronco. The label bears the Ford blue oval logo and states "THE PAINT CODE FOR THIS VEHICLE…
• Ford E4OD Solenoid Body Pin ID, Resistance Chart & PCM Pins - ATSG Fig. 16
  This page (page 13, Figure 16) from an ATSG (Automatic Transmission Service Group) Technical Service Information manual covers solenoid body pin identification and function, uploaded as a reference for a Ford E4OD…
• 1995 Ford Bronco Vehicle Certification Label - VIN, GVWR, Axle & Paint Codes
  This is a scan of the factory Vehicle Certification (data/spec) label riveted to a Ford truck, manufactured by Ford Motor Co. in the U.S.A. with a build date of 11/94, consistent with the uploader's claimed 1995 Ford…
• Holden VE / 2009 Pontiac G8 Data Plate - LS3, M10 Trans, FE3, G84 Axle Codes
  This photo shows an embossed metal vehicle identification/data spec plate riveted to a body panel (photographed in a dark engine bay or door jamb area). The plate lists the vehicle's build codes: Model VE8EK69-, Body…
• 1996 Ford Bronco VIN Data Plate - GVWR, Axle, Trans & Paint Codes (10/95)
  This is the factory VIN/certification data plate (Safety Compliance Certification Label) from a Ford sport-utility vehicle manufactured by Ford Motor Co. in the U.S.A. with a build date of 10/95. It lists the Gross…
• Ford certification label dated 04/96, VIN 1FMEU15N7TLB72626, type MPV, 6050LB GVWR, 2800LB front and 3770LB rear GAWR on P235/75R15XL tires.
• Ford certification label dated 10/80, VIN 1FTEX14E2BKA08931, 6450LB GVWR, 3200LB front and 3686LB rear GAWR, P235/75R15SL tires.
• Ford Motor Co. U.S.A. certification label dated 03/96 for a 1FTEF15 truck, 6250LB GVWR, 2950LB front and 3800LB rear GAWR, P235/75R15XL tires.
• Ford safety certification label dated 12/93, VIN 1FTEX15YXRKA65090, type TRUCK, GVWR 6050 lb, with P235/75R15XL tires on 15X7.5J rims.
• Ford safety certification label dated 04/96, VIN 1FMEU15N7TLB72626, type MPV, GVWR 6050 lb, with P235/75R15XL tires on 15X7.5J rims.
• Ford of Canada certification label dated 11/92, VIN 2FTEF15N6PCA34252, type F155, 6250LB GVWR with P235/75R15XL tires and paint and axle codes.
• Label stating the vehicle was altered by IMPCO Technologies and conforms to federal motor vehicle safety standards, with post-conversion weight fields.
• Ford OEM Panel F2TZ-15044D70-A Parts Box Label - 1992-96 Bronco/F-Series Bezel
  This image shows a genuine Ford Parts packaging label affixed to a cardboard shipping box. The label identifies the contents as a single (1X) 'PANEL / PANEL' with Ford part number F2TZ-15044D70-A and secondary…
• Ford Bronco Fuel Pump Shut-Off Switch Warning Label F2UB-9N831-AA
  This is a photograph of a factory-applied bilingual (English/French) warning decal found on a Ford vehicle, uploaded to the gallery of a 1995 Ford Bronco. The label, titled 'IF ENGINE FAILS TO START' / 'SI LE MOTEUR…
• 1995 Ford Bronco Calibration Decal 5-64T-R10 - Part F5AE-6E061-MHF
  This document is a photograph of a Ford engine calibration decal (data/spec plate), printed in both English and French ("CALIBRATION / ÉTALONNAGE"). The label displays the calibration code "5-64T-R10" in large type…
• 1995 Ford Bronco Door Data Plate - VIN, GVWR, Axle & Paint Codes
  This is the factory data/certification label (Safety Compliance Certification Label) for a 1995 Ford Bronco, manufactured by Ford Motor Co. in the U.S.A. with a build date of 06/95. It lists the Gross Vehicle Weight…
• 1996 Ford Bronco Door Data Plate - VIN, GVWR, Axle & Tire Specs (05/96)
  This is the federal certification / safety compliance data plate (door jamb sticker) from a Ford vehicle manufactured 05/96 by Ford Motor Co. in the U.S.A. It lists the Gross Vehicle Weight Rating of 6300 lb / 2857 kg…
• 1996 Ford Bronco Door Data Plate - VIN, GVWR, Tire, Paint & Axle Codes
  This is the factory Safety Compliance Certification Label (data/spec plate) affixed to a 1996 Ford Bronco, manufactured by Ford Motor Co. in the U.S.A. with a build date of 05/96. It lists the Gross Vehicle Weight…
• 1995 Ford Bronco Door Jamb Data Plate - GVWR, Tire Pressure & Axle Codes
  This document is a photograph of the manufacturer's certification / safety compliance data plate (door jamb sticker) from a Ford vehicle, uploaded as belonging to a 1995 Ford Bronco. The label states the vehicle was…
• Bronco certification label codes: exterior paint CB, WB 105, type-GVW U154, body WK, trans E, axle H9, tape 0, springs J4D, part F0TA-15204A10-AA.
• Ford certification label dated 04/95 for VIN 1FMEU15N6SLB49384 with GVWR 6050LB, P235/75R15XL tires, paint 83, axle 19 and trans E.
• GM certification label dated 09/90 for MPV VIN 1GNEV18K2MF109590, GVWR 6100/02767, 15X7/8JJ rims at 30/207 front and 35/241 rear PSI/KPA.
• 1995 Ford Bronco Door Data Plate - VIN, GVWR, Axle & Trans Codes (05/95)
  This is a photograph of the factory Safety Compliance Certification Label (door data plate) affixed to a Ford vehicle, manufactured by Ford Motor Co. in the U.S.A. with a build date of 05/95. The label lists the Gross…
• 1995 Ford Bronco A/C Refrigerant Decal - R-134a Charge & Oil Specs (F5TH-19A688-AA)
  This document is a photograph of the factory air conditioning caution/specification decal (data spec plate) from a Ford vehicle, uploaded to a 1995 Ford Bronco gallery. The bilingual (English/French) label identifies…
• Ford safety certification label dated 04/95 showing GVWR, front and rear GAWR, P265/75R15SL tires on 15X7.5J rims at 35 PSI, and paint and trim codes.
• Ford label for a 1995 medium-duty 5.8L, OBD I certified: timing check to 10°BTDC, SAE 5W-30 oil, ASF-32C plugs gap .042-.046.
• Ford certification label dated 10/92 showing 6250LB GVWR, P235/75R15XL tires, VIN 1FTEX14HXPKA30287 and exterior paint, trans and axle codes.
• Upside-down photo of a Ford label dated 05/94 for MPV VIN 1FMEU15H4RLB28215: 6050LB GVWR, P235/75R15XL tires, W.B. 105, type U152, axle 19.
• Ford certification label, 11/95, VIN 1FMEU15H5TLA85060: GVWR 6300LB, front GAWR 2800LB, rear 3770LB, P265/75R15SL tires at 35 PSI cold, axle 19.
• Ford certification label, MFD 07/93, VIN 1FMEU15H2PLB21518: GVWR 6300LB, P265/75R15SL tires on 15X7.5J rims at 35 PSI cold, axle 19, trans E.
• Ford Differential Tag Decoder - Axle Gear Ratio, Ring Gear Size & Date Code
  This document is an annotated diagram explaining how to decode a Ford differential (axle) identification tag. It shows an example tag stamped "S260A" on the top line and "3 27 75 0D04" on the bottom line, with callout…
• Dana Differential Tag Decoder - Axle Ratio, BOM & Limited Slip ID Diagram
  This document is a labeled reference diagram titled "Dana Differential Tags," showing how to decode the metal identification tags found on Dana differential/axle assemblies. Two tag formats are illustrated side by…
• Ford safety certification label dated 04/95: GVWR 6050LB, front GAWR 2800LB, rear 3770LB, P235/75R15XL tires, axle code H9 and trans code E.
• Ford door certification label, date 02/96, type MPV, GVWR 6050LB/2744KG, P235/75R15XL tires on 15X7.5J rims at 35 PSI cold.
• U.S. Property data plate for a Ford Bronco 4x4 truck utility: NSN 2320-01-104-1694, 5400 lb GVWR, 1000 lb payload, delivered 07-83, contract GS-00S-64373.
• Ford safety certification label for a 1995 Bronco MPV, built 05/95, with front and rear GAWR, P265/75R15SL tires at 35 PSI and VIN 1FMEU15H9SLB82907.
• Ford certification label, built 06/95: GVWR 6050LB/2744KG, GAWR 2800LB front, 3770LB rear, P265/75R15SL at 35 PSI, VIN 1FMEU15N4SLC09923, axle code 19.
• 1996 Bronco safety certification label: built 03/96, GVWR 6300LB, front/rear GAWR 2800/3770LB, P265/75R15SL tires at 35 PSI, axle code 19.
• Ford certification label dated 11/94, VIN 1FMEU15H8SLA67117, GVWR 6300 lb, P235/75R15XL tires at 35/41 psi, and codes MB 105, U154, Y6, E, H9.
• Ford certification label dated 12/94, VIN 1FMEU15H8SLA72298, GVWR 6300 lb, P265/75R15SL tires at 35 psi, and codes MB 105, U154, XK, E, H9, J4D.
• 1994 Ford Bronco Door Jamb VIN Data Plate - GVWR, Axle & Paint Codes
  This is the federal Motor Vehicle Safety Standards certification label (data/spec plate) affixed to a 1994 Ford Bronco, manufactured by Ford Motor Co. in the U.S.A. with a build date of 01/94. It states the Gross…
• 1994 Ford Bronco A/C Refrigerant Label - R-134a Charge & Oil Specs F4TH-19A688-AB
  This is a bilingual (English/French) factory air conditioning refrigerant specification caution label affixed under the hood of a Ford truck, uploaded to the gallery of a 1994 Ford Bronco. The label identifies the A/C…
• Ford Bronco/F-Series Axle Code Chart - Certification Label Rear Axle Ratios
  This document is a Ford reference illustration (figure number Y2671-L) explaining how to read the vehicle certification label (Safety Compliance Certification Label) manufactured by Ford Motor Co. in the U.S.A. The…
• Ford door label dated 12/94: GVWR 6300LB/2857KG, GAWR 2800LB front, 3770LB rear, P265/75R15SL on 15X7.5J at 35 PSI, VIN 1FMEU15H7SLA78111, axle H9.
• Ford certification label from a 1995 Bronco dated 12/94, showing GAWR ratings, P235/75R15XL tire data and VIN 1FMEU15H7SLA78254.
• Ford door jamb certification label dated 05/01: GVWR 9900LB/4490KG, LT265/75R16E tires, VIN 3FTSW31F51MA73441, made in Mexico.
• Ford certification label dated 06/95 for VIN 1FMEU15NXSLB87233, type MPV, 6050 lb GVWR, P265/75R15SL tires and body, trans, axle and spring codes.
• Dana axle label showing D-135-H, Ford PN F2TA-3002-RB, serial number 22920206027, 3.07 ratio and 17-FEB-92 14:09 build stamp.
• Dana axle label close-up: Dana PN 610408 7, 17-FEB-92 14:09, 3.07, STD, D-135-H, customer PN F2TA-3002-RB, CBA, N, RB, 44.
• Dana axle label on the axle tube reading D-135-H, Dana PN 610408 7, Ford PN F2TA-3002-RB, built 17-FEB-92 14:09, 3.07 ratio, STD.
• Ford certification label dated 02/92 with VIN 1FMEU15Y3NLA58183, 6050LB GVWR, P235/75R15XL tires, M transmission, axle 18 and V4Z springs.
• Weller Reman Center Transmission ID Tag - Serial Plate, Grand Rapids MI
  This is a photograph of a metal identification tag riveted to an orange-painted cast-iron drivetrain component (appearing to be a remanufactured transmission or transfer case housing, photographed in situ near a…
• 1987 Navistar International DT-466 / DTA-466 Emission Control Data Plate Specs
  This is a photograph of a Navistar International emission control information data plate affixed to the valve cover of an International DT-466 / DTA-466 diesel engine. The label, part number 1812517C1, states the…
• Rusted blue embossed warranty data plate stamped 9 0 8 68 S6X Q01 B 3 and RS27 83 3 44 617 361274 beneath the letter and number key rows.
• Makita LS1030 10" Miter Saw Data Plate - Model & Specs Nameplate
  This image shows the manufacturer's data/specification plate riveted to the housing of a Makita 10-inch Miter Saw, Model LS1030. The plate identifies the tool brand (Makita), tool type (10" Miter Saw), and model number…
• Ford door jamb certification label dated 03/97 showing VIN 1FTJW35F4VEB40001, 9200LB GVWR, axle ratings, LT235/85R16E tire pressures and calibration 7-90A.
• Ford Motor Co. door certification label with a 03-79 build date, 6050 LB GVWR, 3150 LB front GAWR, and tire and rim pressure ratings.
• Ford certification label dated 06/93: GVWR 6050LB/2744KG, GAWR 2800LB front and 3770LB rear, P235/75R15XL tires on 15X7.5J rims at 35 and 41 PSI cold.
• Ford certification label dated 10/95 showing GVWR, P265/75R15SL tires, type MPV and a VIN starting 1FMEU15H2TL with a digit blacked out.
• 1996 Ford Data Spec Plate - VIN 1FTFS24H4THB35875, GVWR & Tire Pressures
  This is a photograph of a Ford Motor Company safety compliance / certification data plate (data spec sticker), typically located on the driver's door jamb. The label states the vehicle was manufactured in 04/96 with a…
• Ford certification label, built 11/91, VIN 1FMEU15H1NLA35632, GVWR 6050LB/2744KG, P235/75R15XL tires at 35/41 PSI cold, axle code H8, type MPV.
• Window sticker for a Pacific Green 1996 Bronco 4x4, VIN 1FMEU15N3TLB72669, with 5.0L EFI V-8, 14/17 MPG and a $21,275.00 total price.
• Eaton ELocker ED 19660-1 Box Label - Ford 8.8 Rear 31 Spline Locker
  This image shows a product identification label on an Eaton shipping box, photographed by the uploader. The label is from Eaton's Torque Control Products Division and identifies the contents as part number ED 19660-1…
• Numbered guide to a Ford truck certification label dated 2/96, GVWR 6600 LB/2994 KG, explaining the GAWR, tire, VIN, paint and axle code fields.
• Ford 8.8 Axle Tag Decoder Diagram - Ratio, Plant Code, Build Date (Bronco)
  This document is a Ford service-manual style illustration explaining how to read a Ford rear axle identification tag (data/spec plate). The drawing shows a metal tag with a mounting hole and stamped markings, with…
• Ford certification label dated 06/94 listing 6050LB GVWR, P265/75R15SL tires at 35 PSI, VIN 1FMEU15N9RLB48580, body Y6 and axle 19.
• Label for carburetor 0-80457S: 600 CFM vac. sec. square bore, electric choke, universal 65-69 cars and light trucks, not legal for street use in Calif.
• 1996 Ford Bronco Eddie Bauer Spec Sheet - Factory & Aftermarket Modifications
  This document is an owner-made specification/show sheet for a 1996 Ford Bronco Eddie Bauer, built May 1996 (with production noted as ending June 1996). It lists the factory specifications: 351w engine, automatic…
• Ford 5.0L F-Series/Bronco Spark Plug Wire Routing & Firing Order Decal
  This is a Ford Motor Company 'Important Vehicle Information' (VECI-style) underhood decal for the 5.0L V8 engine in F-Series trucks and the Bronco, printed bilingually in English and French. The label warns that, to…
• Faded blue-print Ford Motor Co. U.S.A. certification label from the early 1980s with GVWR, axle rating, tire, paint and trim code fields.
• Dana axle tag dated 8-APR-96 showing a 3.54 ratio, a Ford F6TA customer part number and serial number 2960403576 with barcodes.
• Ford factory build sheet printed with option and component codes in labeled fields, including an F6TE air cleaner code and 6 visors.
• GM Service Parts Identification label, DO NOT REMOVE, listing VIN 1GNEV18K2MF109590 and RPO option codes including L05, MXO and G80.
• Soviet BTR APC Interior Data Plates - Gearbox, PTO, Winch & Water-Jet Controls
  This photograph shows Russian-language instruction/data plates mounted inside a Soviet-era amphibious armored personnel carrier (BTR type, indicated by the words 'бронетранспортеру', armored personnel carrier, and…
• Russian Amphibious Vehicle Driver Warning Plate - Check Hull Plugs Before Water Entry
  This is a photograph (not a scanned paper document) of a black-and-white riveted/bolted metal instruction plate mounted on the light-colored interior hull of a vehicle. The plate is in Russian and reads: "ВОДИТЕЛЬ!…
• 1995 Ford Bronco Jumper Harness Recall Tag - Internal Fuse, Service Kit #9F924
  This is a photograph of a blue warning/information tag attached to a black wiring jumper harness, photographed against a galvanized metal surface. The tag was uploaded to SuperMotors.net as documentation for a 1995…
• SCAT 9351W46 Cast Crankshaft 4.00" Stroke Ford 351W - Box Label 9-351-400-6000-2100W
  This document is a product box label from SCAT Enterprises for a cast crankshaft intended for a Ford engine, described as "CRANK CAST FORD 4.00" STRK" (4.00-inch stroke). The label includes a UPC-style barcode with the…
• SCAT 2-ICR6200-7/16 I-Beam Rod Chevy 6.200 Bushed - Box Label & Weights
  This is a photograph of a SCAT Enterprises product box label for a connecting rod: "ROD IBEAM CHEV 6.200 BUSHD", an I-beam style connecting rod for Chevrolet applications with a 6.200-inch length and a bushed (floating…
• MAHLE 9123KM Piston Ring Set Box Label - CP 20 Cross Reference 2M139 E251K
  This is a photograph of a MAHLE (Clevite) piston ring set box label, not a wiring or fuse diagram. The label identifies the contents as one set of piston rings, part number designation CP 20, with cross-reference part…
• MAHLE 40564CP.030 Piston Ring Set Box Label - Cross Refs 9123KM, 2M139, E251K
  This is a photograph of a MAHLE parts box label for a piston ring set, part number 40564CP.030. The ".030" suffix indicates an oversize specification. The label shows the UPC barcode number 725975137833 and a QR code…
• CB-663P / 2555CP Engine Bearing Box Label - Part Number & Codes
  This image is a close-up photograph of a parts box end label (data/spec plate style) showing an automotive part number and packaging information. The prominent part number is "CB-663 P", with a secondary number…
• MS-1432 P Main Bearing Set Box Label - MAHLE/Clevite Part Number, Made in USA
  This image shows the end panel of a small cardboard parts box bearing the part number MS-1432 P. Below the part number is the code 5078M, a printed barcode, the numbers 0270675 and 52709, and country-of-origin…
• Torn and stained Ford factory build sheet printed on tractor-feed paper, showing coded body, paint, trim, engine and option fields.
• Rear Axle Housing End Flange Dimensions Chart - Ford 8.8, 9", Chevy 12 Bolt, Dana 60
  This document is a technical reference chart showing axle housing end / brake flange dimensions for eleven common rear axle types used in domestic vehicles. Each pattern is drawn as a face-on outline of the flange with…
• Rear Axle Housing Flange ID Chart - Ford 8.8, 9", Mopar, Chevy 12 Bolt, Dana 60
  This document is a rear axle identification reference chart. It instructs readers on how to correctly identify a rear end assembly using three key measurements: outside bearing diameter, housing flange dimensions, and…
• Trailer Coupler Warning Plate - GVWR Ratings for 50mm & 2-Inch Ball, Tongue Load
  This is a photograph of a stamped warning/specification plate on a trailer coupler (the album also contains a related "Trailer Brake actuator" image, suggesting this is a surge-brake style coupler). The plate states…
• 1996 Ford Bronco PCM Connector Pinout Diagram - 104-Pin Numbering (V9286-A)
  This document is a line-art illustration of the Powertrain Control Module (PCM) connector, showing the connector face as viewed with its 104 pin cavities arranged in four horizontal rows. Numeric callouts on the left…
• 1996 Ford Bronco Instrument Cluster Connector C1 Pinout Diagram (14-Pin)
  This document is a line-art connector face diagram identified by the Ford illustration number K20271-C. It depicts a 14-cavity electrical connector viewed from the mating face, with a center keyway rib and a locking…
• Ford T19 Transmission Specs - Gear Ratios, Dimensions & Weight at a Glance
  This document is a quick-reference specification card for the Ford T19 manual transmission, presented over an image of a transmission gasket outline. It identifies the transmission's manufacturer as Borg Warner and…
• Ford Motor Co. safety certification label for VIN 1FMEU15N5PLA51213, manufactured 01/93, type MPV, with GAWR, tire size and inflation data.
• Stamped metal identification tag bolted to a rusty housing, marked S836B over 08 88 2B20.
• New Process Gear, Syracuse NY tag on an NP205 transfer case, ratio 196, serial 9 25 77, assembly number D7TA7A195KA.
• Ford Motor Co. U.S.A. certification label showing the VIN, GVWR and GAWR ratings and the federal safety standards statement, partly stained.
• Ford Monroney window sticker for a 1995 Bronco 4WD listing standard and optional equipment, 13 city / 17 highway MPG and a $25,335.00 total price.
• TVR Engineering Ltd plate for the Vixen 1600 listing recommended lubricants by brand for the engine, gearbox, differential, grease points and wheel hubs.
• Ford 5.0L F-Series/Bronco Spark Plug Wire Routing & Firing Order 1-3-7-2-6-5-4-8
  This is a scan of a Ford Motor Company "Important Vehicle Information" underhood decal (bilingual English/French) for 5.0L F-Series and Bronco trucks. The label's purpose is to show the correct spark plug wire routing…
• Ford certification label with axle code 252 decoded: rear axle codes listing capacity and ratio, 2.73 to 5.13, and front axle code 2 for limited-slip.
• 1996 Ford Bronco Certified Scale Ticket - 7,200 lb Total Weight & Axle Weights
  This document is a certified scale ticket (Ticket #16423) issued by QuikTrip Corporation at QuikTrip store #4216, located at 1210 S 1st St, Bennett, CO 80102, dated 06/23/25 at 19:37:08. It records a public weighmaster…
• 1996 Ford Bronco Wheel Alignment Report - Caster, Camber & Toe Specs
  This document is a printed wheel alignment report for a 1996 Ford Bronco (listed as "FORD TRUCKS 1, 1996, BRONCO"). It records initial (before) and final (after) alignment measurements against factory specification…
• Ford F7TZ 7L323 AA Transfer Case Input Shaft Seal - OEM Parts Label & Photo
  This is a photograph of a Ford Motorcraft parts bag/shipping label for Ford part number F7TZ 7L323 AA (quantity: ONE). The label shows the part was shipped from Ford Portland HVC (High Velocity Center), 8929 N. Ramsey…
• 1996 Ford Bronco Driveshaft Part Number Tag F6TA-4602-ZA (Dated 04/29/96)
  This photograph shows a factory data/spec sticker on a cylindrical metal component, most likely a driveshaft tube, uploaded to a 1996 Ford Bronco gallery. The most prominent legible marking is the Ford-style part…
• Probe Industries P4082F-030 Forged Pistons - Ford 351W 4.030 Bore -24cc Dish
  This is a photograph of a Probe Industries product box for forged pistons, marked "Proudly made in America!" with an American flag graphic. The box bears a printed part label identifying the contents as part number…