inFs' 06-02% REMOVAL AND INSTALLATION (Continued) Brakes, Rear Drum Spring Replacement, Typical BRAKE SHOE RETRACTING SPRINGS-2295 REMOVAL BRAKE CYLINDER CLAMP BRAKE SHOE RETRACTING SPRING-229E lNSTALLATlON Salt-Adjusting Brake Assemblies. Rear, Standard, F-150, 5-150 and Bronco G Fonwnnn 1 2 s 19 5 6 7 18 8 .' II 9 17 ,1 12 16 15 10 4 13 ta-lNCl-l REAR BRAKE [EFT SIDE) HBB17-A Part Item Number Description 1 2028 Brake Shoe Anchor Pin Guide Plate 2 - Anchor Pin (Part of 2211) a 2261 Rear Wheel Cylinder 4 351467-5 Washer 5 2296 Brake Shoe Retracting Spring 6 2200 Rear Brake Shoe and Lining Secondary 7 2A179 Cable Guide 8 2A17B Brake Shoe Adjusting Lever Cable 9 M637 Parking Brake Lever 10 2049 Brake Shoe Adjusting Screw Spring 1 1 Pivot Hook (Part of 2A176) 12 2A635 Rear Parking Brake Cable 13 2A1 78 IErake Shoe Adjusting Lever it 14 2041 Brake Adjuster Screw 15 Parking Brake Cable Housing Retainer (Part of 2A535) 16 2200 Rear Brake Shoe and Lining Primary 17 2A642 Primary Brake Shoe Parking Brake Lever Link 18 2068 Brake Shoe Hold Down Spring 19 2A601 Parking Brake Link Spring installation 1. Clean the ledge pads on the brake backing plate. Send lightly to bare metal. 2. Apply a light coating (0.30mrn [1 /32 inch] thick) of high temperature lithium-base grease Premium Long:Lile Grease XG-iC or -K (ESA<M1CT_5B) or equivalent or Disc Brake Caliper Lubricant D7AZ-19590A (ESAM1C172-A) or equivalent at the points wherethe rear brake shoes and linings touch the brake backing plate. Also lubricate the adjusting cable eye and the anchor pin area, 3. Before installing the rear brake shoes and linings. assemble the parking brake lever on the rear brake shoes and linings and secure with the spring washer and parking brake lever pin retainer. 4. Position the rear brake shoes and linings on the brake backing plate. and Install the brake shoe hold down spring pins (2069). brake shoe hold down springs, and brake shoe hold down spring cups. Install the primary brake shoe parking brake lever link, parking brake link spring, and washer. Connect the rear parking brake cable to the parking brake lever. 5. install the brake shoe anchor pin guide plate, if equipped. and place the cable anchor over the anchor pin with the crimped side toward the brake backing plate. 1994 EconolineIF-150. F-250. F-350/Bronco/F~Super Duly BodyIChasela Aug 1993