1978 Ford Bronco Roof Moulding Installation Diagram - Part 9842324-5-A
Exploded parts breakdown of the body side moulding installation showing mouldings, screws and U-nuts with a detail view.
This is an exploded parts diagram showing the installation of exterior moulding (trim) on the rear body/topper section of a vehicle, uploaded to a 1978 Ford Bronco gallery. The line drawing depicts the rear quarter and roof area of the body shell with an orientation arrow labeled 'FRONT OF BODY.' The diagram identifies three fastener/trim components with Ford part numbers: the moulding itself (part number 9842324-5-A), attaching screws (55862-S9), and U-nuts (384816-S100) that receive the screws. Callout lines show the mounting hole locations along the roof rail and pillar where the screws and U-nuts secure the moulding. A circled detail inset labeled 'VIEW AA' enlarges the corner joint area (marked 'AA' on the main view), showing how the two moulding sections meet at the corner and how the U-nut and screws are positioned at that junction. A reader can learn the correct part numbers for the moulding, screws, and U-nuts, and the fastener locations and assembly relationship needed to install or replace this body moulding trim.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What is the part number for the moulding shown in this diagram?
- The moulding part number is 9842324-5-A, called out at multiple locations on the diagram.
- What screws are used to attach the moulding?
- Screws with part number 55862-S9 are used to fasten the moulding.
- What holds the moulding screws in place?
- U-nuts, part number 384816-S100, are used at the mounting points to receive the screws.
- What does 'VIEW AA' show in the diagram?
- VIEW AA is an enlarged inset detail of the corner area marked 'AA' on the main drawing, showing how the moulding sections, U-nut (384816-S100), and screws (55862-S9) fit together at the corner joint.
Comments
More from this build
No comments yet.