1987 Ford LTD Crown Victoria Upper Control Arm Inner Shaft Install Diagram

This document is a single-page scanned illustration from Mitchell Repair Information Company (© 2003), covering the front suspension of a 1987 Ford LTD Crown Victoria. Titled "Fig. 5: Installing Upper Control Arm Inner Shaft" and credited "Courtesy of FORD MOTOR CO.," the page presents a line-art exploded/installation drawing showing how the inner shaft assembles into the upper control arm. Two arrowed callouts identify the "Inner Shaft" and the "Upper Control Arm." The drawing depicts the inner shaft with a bolt, washer, and bushing components positioned above the control arm mounting point, illustrating the orientation for installation. The figure carries the illustration number 26989 in the lower-left corner. A page footer indicates the document was printed Friday, February 13, 2004 at 12:18PM and is Page 1. No torque specifications, part numbers, or written procedure steps appear on this page, it is purely a labeled reference diagram intended to accompany a service procedure for replacing or installing the upper control arm inner shaft on this vehicle's front suspension. Faint ghosting of a diagram from the reverse side of the page is visible in the background but is not legible.