What is the minimum relief pressure for the 3.0L (2V) Taurus power steering pump?

The 3.0L (2V) engine with pump model HBC-LC has a minimum relief pressure of 8960 kPa (1300 psi).

What power steering pump is used on the 3.4L (4V) engine and what are its specs?

The 3.4L (4V) uses pump model ZUA: minimum flow 7.57 L/min (2.0 gal/min) at 5100 kPa (740 psi), minimum relief pressure 10135 kPa (1470 psi), maximum relief pressure 10963 kPa (1590 psi), and maximum free flow 8.7 L/min (2.3 gal/min) at 1500 rpm.

What is the pump part number for the 3.0L/3.2L SHO?

The 3.0L/3.2L SHO pump is listed as F3DC-3A674-BA, with 3.4 L/min minimum flow, 9650 kPa (1400 psi) minimum relief pressure, and 10550 kPa (1530 psi) maximum relief pressure.

What conditions must be met when checking pump minimum flow capacity?

Flow depends on pump model, engine rpm, and pulley drive ratio, and the engine idle rpm must be set to specification when checking pump minimum flow capacity.

What is the maximum free flow at 1500 rpm for the 3.0L and 3.8L Police engines?

9.8 L/min (2.6 gal/min) with pump model HBC-RE.

Home/ Registry/ Ford/ Taurus/ 1996-1999/ 1997 Ford Taurus/ Photo supermotors.net/registry/media/524932

Ford Taurus Power Steering Pump Specs - Flow & Relief Pressure (Gen 2 & 3)

Power steering pump specifications tables listing flow and relief pressure by engine

‹ ›

Reference · 1996-1999 TaurusAll 20 manual pages

Ford Taurus Center Console Panel Diagram - Finish Panel 045A76 & 045A06

Ford A/C Electronic Blend Door Actuator 19E616 Location Diagram (Taurus)

Transmission range selector lever position table with min/max resistance in ohms and range volts

Ford Taurus Power Steering Pump Specs - Flow & Relief Pressure (Gen 2 & 3)

Ford ECT/IAT Sensor Voltage & Resistance Chart - Temperature Values Table

Exhaust pipe diameter chart by engine CID and horsepower for single and dual systems

1996-1999 Taurus spring codes table with door codes, tag codes, load/rate figures and part numbers

Vehicle certification label code chart decoding the AX transmission code, L for AX4S and X for AX4N

20manual pages1996-1999 Ford Taurus More reference

'02 Taurus/Sable connector views for C176, C177, C180, C181 and C182 with pin tables

Wiring diagram

Multi-function switch component testing tables with circuit numbers, wire colors and switch positions

Service procedure

Exploded parts

Ford Taurus / Sable Power Steering Pump & Gear Specifications - VAPS, SHO

Spec plate

Ford Taurus SHO 3.4L V8 Serpentine Drive Belt Routing Diagram & Pulley Guide

Schematic

1997 Ford Taurus Gen 3 Engine Compartment Fuse Box Diagram - Fuse & Relay Chart

Fuse chart

V8 Prototype Intake Manifold Runner Horns Patent Drawing: Figure 8 Plenum Layout

Blueprint

1997 Ford Taurus EATC Vacuum Schematic - Hose Routing & Part Numbers

Vacuum routing

Brochure

Power steering pump specification tables listing minimum flow, relief pressures and free flow by engine and pump model.

Part of 1996-1999 Ford Taurus Manual Pages

AI caption June 2007 · Photo 292 of 575

This document presents two power steering pump specification tables, apparently covering second- and third-generation Ford Taurus engines. The first table lists specifications for the 3.0L and 3.8L Police engines (pump model HBC-RE) and the 3.0L/3.2L SHO engines (pump part number F3DC-3A674-BA): both have a minimum flow of 3.4 L/min (0.9 gal/min) at 5100 kPa (740 psi) and 78°C (172°F), minimum relief pressure of 9650 kPa (1400 psi), maximum relief pressure of 10550 kPa (1530 psi), and maximum free flow of 9.8 L/min (2.6 gal/min) at 1500 rpm. The second table covers the 3.0L (2V) with pump HBC-LC and 3.0L (4V) with pump HBD-BM, both 3.4 L/min minimum flow, 8960 kPa (1300 psi) minimum relief, 10205 kPa (1480 psi) maximum relief, 9.8 L/min free flow, and the 3.4L (4V) with pump ZUA at 7.57 L/min (2.0 gal/min) minimum flow, 10135 kPa (1470 psi) minimum relief, 10963 kPa (1590 psi) maximum relief, and 8.7 L/min (2.3 gal/min) free flow. Footnotes on both tables stress that flow depends on pump model, engine rpm, and pulley drive ratio, and that idle rpm must be set to specification when testing minimum flow.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is the minimum relief pressure for the 3.0L (2V) Taurus power steering pump?: The 3.0L (2V) engine with pump model HBC-LC has a minimum relief pressure of 8960 kPa (1300 psi).
What power steering pump is used on the 3.4L (4V) engine and what are its specs?: The 3.4L (4V) uses pump model ZUA: minimum flow 7.57 L/min (2.0 gal/min) at 5100 kPa (740 psi), minimum relief pressure 10135 kPa (1470 psi), maximum relief pressure 10963 kPa (1590 psi), and maximum free flow 8.7 L/min (2.3 gal/min) at 1500 rpm.
What is the pump part number for the 3.0L/3.2L SHO?: The 3.0L/3.2L SHO pump is listed as F3DC-3A674-BA, with 3.4 L/min minimum flow, 9650 kPa (1400 psi) minimum relief pressure, and 10550 kPa (1530 psi) maximum relief pressure.
What conditions must be met when checking pump minimum flow capacity?: Flow depends on pump model, engine rpm, and pulley drive ratio, and the engine idle rpm must be set to specification when checking pump minimum flow capacity.
What is the maximum free flow at 1500 rpm for the 3.0L and 3.8L Police engines?: 9.8 L/min (2.6 gal/min) with pump model HBC-RE.