What was the maximum horsepower recorded for this 1999 Ford Taurus on the dyno?

Max power was 125.1 HP at 5550 RPM.

What was the maximum torque measured?

Max torque was 135.7 ft-lbs at 4550 RPM.

When was this dyno test run performed?

The test run was on 9/22/07 at 10:56:18 AM, at the Kettering Car Club Dyno Day.

What engine does the tested vehicle have?

The sheet lists Cyl/Disp. as 6/3.0, i.e., a 6-cylinder 3.0-liter engine, in a 1999 Ford Taurus.

What vehicle weight is listed on the dyno sheet?

Weight is listed as 3350.0, and HP @ 50 MPH is listed as 13.60.

Home/ Registry/ Ford/ Taurus/ 1996-1999/ 1999 Ford Taurus/ Photo supermotors.net/registry/media/566661

1999 Ford Taurus 3.0L V6 Dyno Results - 125.1 HP / 135.7 Ft-Lbs Curve Sheet

1999 Ford Taurus 3.0L dyno horsepower curve 125.1 hp 135.7 lb-ft Kettering Car Club Dyno Day

‹ ›

Dynojet horsepower/torque printout for a 1999 Ford Taurus 3.0L V6: max power 125.1 hp at 5550 RPM, max torque 135.7 lb-ft at 4550 RPM, 3350 lb vehicle.

AI caption September 2007 · Photo 213 of 228

This document is a chassis dynamometer test result sheet ("HorsePower Curve Test Results") for a 1999 Ford Taurus with a 6-cylinder, 3.0-liter engine, tested at a Kettering Car Club Dyno Day event (customer listed as "ThMilesbirds"). The test run was recorded on 9/22/07 at 10:56:18 AM. Key results: maximum power of 125.1 HP at 5550 RPM and maximum torque of 135.7 ft-lbs at 4550 RPM. The vehicle weight is listed as 3350.0 lbs, with horsepower at 50 MPH recorded as 13.60. The license and VIN fields are redacted/obscured. The lower portion of the sheet contains a graph plotting horsepower (blue trace) and torque in ft-lbs (green trace) against engine speed from 1800 to 7800 RPM, with a vertical scale from 0 to 150. The traces show the measured pull occurring roughly between 4000 and 5700 RPM, with torque peaking slightly above the horsepower curve mid-range before the two curves converge near the end of the pull. A reader can learn the actual measured wheel output of this specific 1999 Taurus 3.0L V6 as recorded on a dyno in September 2007.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What was the maximum horsepower recorded for this 1999 Ford Taurus on the dyno?: Max power was 125.1 HP at 5550 RPM.
What was the maximum torque measured?: Max torque was 135.7 ft-lbs at 4550 RPM.
When was this dyno test run performed?: The test run was on 9/22/07 at 10:56:18 AM, at the Kettering Car Club Dyno Day.
What engine does the tested vehicle have?: The sheet lists Cyl/Disp. as 6/3.0, i.e., a 6-cylinder 3.0-liter engine, in a 1999 Ford Taurus.
What vehicle weight is listed on the dyno sheet?: Weight is listed as 3350.0, and HP @ 50 MPH is listed as 13.60.