Schematics — Suzuki Samurai 1986-1995
Technical Reference
Member-uploaded diagrams & documents for this generation. AI-classified; community-verified where badged.
Schematics
- Assembly schematic of a receiver-mount winch in a drop-in bumper configuration with a 2-inch pinning tube callout.
- Schematic of the ignition system showing the ECM, noise suppressor, ignition coil and igniter with a numbered legend and ECM connector pinout.
- Schematic of the ignition and engine control system showing the ECM, distributor, spark plugs and sensors with a numbered component legend.
- Schematic of the ignition system showing the ECM, noise suppressor, ignition coil and igniter with a numbered legend and ECM connector pinout.
- Schematic of the idle air control valve and throttle body with a cutaway and the ECM input signals from the engine sensors.
- Schematic of the evaporative emissions (EVAP) system showing canister, purge valve, fuel tank and ECM with a numbered legend.
- Schematic of the California-spec EGR system with EGRT sensor and ECM, including a connector pinout and diagnostic note.
- Schematic of the EGR emissions system showing the EGR valve, modulator and solenoid vacuum valve plumbing to the ECM with a numbered component legend.
- EVAP emissions system schematic showing the charcoal canister, purge/SP valves, tank pressure control valve, fuel tank and ECM connections.
- Schematic cross-section of a spring-loaded king pin assembly showing the load path highlighted in red versus the no-load area.
- Color-coded schematic cross-section of a wheel hub and spindle with a note about clearing a locking hub.
- Color-coded schematic cross-section of a front wheel hub, spindle and brake rotor assembly.
- Illustrated harness-routing diagram for a CAMI-built compact SUV (Geo Tracker/Suzuki Sidekick) labeling main, engine, injector, floor, transmission, RWAL, door and remote-mirror sub-harnesses.
- Hand-drawn conceptual schematic of a vehicle frame and wheels with a raised vertical linkage arm.
- Hand-drawn conceptual schematic of a vehicle frame with a pivoting arm and shock linkage in colored outlines.
- Hand-drawn conceptual schematic of a vehicle frame and wheels sketched in colored outlines.
- Simple conceptual schematic showing two boxes with directional arrows connected by a cable around a center block.
- Simple conceptual schematic showing blocks linked by a cable with green expansion arrows on one box.