SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Home/ Registry/ Hyundai/ Genesis/ “Coupe”/ Photo supermotors.net/registry/media/1117307

Hyundai Genesis Coupe 2.0T & 3.8L Engine Oil Viscosity Chart (5W-20/5W-30)

Owner's manual oil viscosity chart showing SAE grades across temperature ranges for gasoline engines

AI caption · Photo 789 of 981

This document is an SAE engine oil viscosity chart from a Hyundai Genesis Coupe owner's/service manual showing the recommended oil viscosity grades by ambient temperature range for two gasoline engines: the 2.0 TCI (turbocharged 2.0L) and the 3.8L V6. The temperature scale runs from -30°C to 50°C (-10°F to 120°F). For the 2.0 TCI engine, SAE 5W-20, 5W-30, or 5W-40 is shown covering the entire temperature range. For the 3.8L engine, four options are shown: 20W-50, 15W-40, and 10W-30 for progressively wider (warmer-biased) temperature ranges, and 5W-20/5W-30 covering the full temperature range. A footnote (*1) applying to both engines states that for better fuel economy, SAE 5W-20 or 5W-30 oil meeting API SL or SM / ILSAC GF-3 or above is recommended, but if that oil is not available in your country, the proper oil should be selected using the viscosity chart. A reader can use this page to determine which oil viscosity grade suits their engine and local climate.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What oil viscosity is recommended for the Genesis Coupe 2.0 turbo (2.0 TCI) engine?
The chart shows 5W-20, 5W-30, or 5W-40 for the 2.0 TCI gasoline engine across the full temperature range (-30°C to 50°C).
What oil viscosities can be used in the 3.8L gasoline engine?
The chart lists 20W-50, 15W-40, and 10W-30 for warmer temperature ranges, and 5W-20 or 5W-30 for the full temperature range from -30°C to 50°C.
Which oil grade is recommended for better fuel economy?
Footnote *1 recommends SAE 5W-20 or 5W-30 with API SL or SM / ILSAC GF-3 or above for better fuel economy. If that oil is not available in your country, select the proper oil using the viscosity chart.
What oil specification standard does the manual call for?
API SL or SM, or ILSAC GF-3 or above.
What temperature range does the viscosity chart cover?
From -30°C to 50°C (approximately -10°F to 120°F).

Comments

No comments yet.

More from this build

Cooling-fan wiring diagram for Theta 2.0 TCI engine with fan relays, fuses and coolant sensor Cooling System wiring diagram for Lambda II 3.8 GDI engine with fan relays, fuses and sensor Service photo labeling instrument-panel wiring connectors I/P-A to I/P-K and Z01 diode Wiring diagram legend of wire color codes, harness and connector identification Service manual figure Photo.59 with callouts to PDM modules and rear parking assist buzzer Service manual figure labeling BCM connectors, in-car temp sensor and TPMS module Close-up of Hyundai Genesis coupe engine bay showing intake manifold, sensors, hoses, and a yellow wire. Starting system wiring diagram with battery, start relays, solenoid and motor, ignition switch and color-coded wires

More Hyundai Genesiss