1995 Ford 5.8L OEM Emissions & Vacuum Hose Routing Diagram Decal (Bronco)

This document is a scan of the OEM Ford Motor Company "Important Vehicle Information" emissions/vacuum decal from the engine compartment of a 1995-model-year Ford with the 5.8L gasoline engine. The left portion states that the vehicle uses electronic engine control systems (idle speed, mixture, and ignition timing are not adjustable) and gives a five-step ignition timing check procedure: turn off the engine, disconnect the in-line SPOUT connector, restart the warmed-up engine, verify timing is 10° BTDC, then shut down and reconnect. It specifies SAE 5W-30 API-certified oil for gasoline engines and states the vehicle conforms to U.S. EPA and California regulations for 1995 model year new medium-duty vehicles, OBD I certified. A tune-up box lists spark plug ASF-32C with a gap of.042-.046, engine calibration 5.8L SFM1045AYM0B, and emission equipment code SFM5.8H8G1EA - TWC(2)/AIR/2HO2S/EGR/SFI. The label part number is F5AE-9C485-LMJ, with a "Catalyst" designation and calibration barcode 58H8G1ED. The right side shows the factory vacuum hose routing schematic connecting the fuel tank(s), carbon canister, CANP solenoid, distributor, air bypass (AIR B), EGR, EVR, SOL V, FPRC, manifold vacuum, throttle body, and vacuum reservoir (VRESER), oriented to the front of the vehicle.