732 Flair 26D/26E RV 12 Volt Chassis Wire Routing Diagram F48-0326 (19C00031)

This document is a production engineering drawing (DWG No. 19C00031, Rev A, released 07/07/14) from Allied Recreation Group titled "12 VOLT CHASSIS ROUTING," showing 12-volt chassis wire routing information (harness F48-0326) on a motorhome chassis, applicable to the 732 Flair model family (with several callouts noted as "ONLY USED ON 732 FLAIR 26E"). The isometric and top-view chassis illustrations show routing paths and destinations for the 12V harness, including connections to the OEM battery, aux battery/generator/fuse-relay area, inwall slide-out (S/O) motors #1 and #2, Ward S/O switch, black and gray water tank sensors, water pump, refrigerator, entry step and light magnetic switch, driver-side and passenger-side marker lights, rear clearance lights, park cable (coax), surround subwoofer speaker, generator and grounds, D/S living S/O module, D/S chassis ground, and bulkhead. A drawing note refers readers to pages 19H90139 (26D) and 19H90140 (26E) for circuit information. Nine general notes cover wiring standards (FMVSS 302/CMVSR 302, NEC, RVIA), harness organization, minimum ½-inch clearance between 12V and 120V wiring, loom separation at crossings, and 120V junction box and wire-nut practices. Ward inwall motor harness part numbers F48-0372 (MTR-1) and F48-0373 (MTR-2) are listed.