Transmission assembly manual page AT-45 with photos and diagrams
Scanned page from an automatic transmission service manual labeled 'ASSEMBLY' (page AT-45), showing step-by-step photos and line drawings for installing the oil pump, low and reverse brake piston, piston retainer, parking pawl and brake band. Includes torque spec of 7-9 N·m and figure references SAT383, SAT667, SAT385 and SAT280.
1. Lubricate outer diameter part of oil pump as- sernbly. Install oil pump assembly and thrust bearing. After installing piston retainer, make sure that its piston seal is not turned over by the application of air pressure to low and reverse brake circuit. 2, Lubricate low and reverse brake piston seal then install piston by tapping it evenly using a wooden block. swam 3. lnstall low and reverse brake piston retainer. 7 . 9 N-m (0.7 - 0.9 kw", s.i 65 'I-lh] snnas 4. Install parking pawl, return spring and parking pawl shaft. Parklng pawl shaft 5. Install brake band. \/L SAY280 AT-45
Is this accurate? Sign in to help verify it.
Comments
More from this build
No comments yet.