How do you relieve serpentine belt tension on the Ford 5.0L/5.8L?

Per the decal, lift counterclockwise using the idler pulley bolt to relieve tension (using a wrench/ratchet on the bolt as shown in the illustration).

What pulleys does the drive belt route around on the 5.0L and 5.8L?

The diagram shows the belt routing around the alternator, idler pulley, tensioner, air pump, fan, crankshaft, A/C compressor (or idler on non-A/C trucks), and power steering pump.

Which engines does this belt routing diagram apply to?

The label states it covers 5.0L & 5.8L drive belt installation (Moteur 5,0 L ou 5,8 L).

What is the Ford part number on this belt routing decal?

F3TA-8B656-BA is printed along the right edge of the label.

What if my truck doesn't have air conditioning?

The diagram labels one pulley as 'A/C OR IDLER,' indicating an idler pulley takes the place of the A/C compressor on non-A/C vehicles.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Eddie Bauer”/ Photo supermotors.net/registry/media/894370

Ford 5.0L & 5.8L Serpentine Belt Routing Diagram - Bronco Drive Belt Decal

Ford drive belt routing diagram label for 5.0L and 5.8L engines showing pulley layout

‹ ›

Reference · 1992-1996 BroncoAll 95 schematics

1994 Ford Bronco Negative Battery Cable Diagram - Ground Cable Lengths

1994 Ford Bronco Negative Battery Cable Diagram - Ground Cable Measurements

Ford 5.0L F-Series/Bronco Firing Order 1-3-7-2-6-5-4-8 & Plug Wire Routing Decal

Ford 5.0L & 5.8L Serpentine Belt Routing Diagram - Bronco Drive Belt Decal

1994 Ford Bronco Custom Speaker Grill Support Frame Drawing - Sub Box Build

1994 Ford Bronco Custom Speaker Grill Drawing - Sub Box Audio Install Template

1994 Ford Bronco Custom Speaker Table Layout Drawing - Sub Box & 6x9 Plan View

1993 Ford V8 Serpentine Belt Routing Diagram - Pulley Layout (Q2601-E)

Ford 5.0 Serpentine Belt Routing Diagram - Factory & Smog Pump Bypass Belt Sizes

1996 Ford Bronco 5.0L & 5.8L Serpentine Belt Routing Diagram (F6TE-8B656-AA)

Caster Angle Diagram - Ford Solid Axle Radius Arm & C-Bushing Steering Geometry

Ford 5.0L / 5.8L HO Firing Order Diagram - Spark Plug Wire Routing & Timing

95schematics1992-1996 Ford Bronco More reference

Wiring diagram

Ford Bronco Front Coil Spring & Shock Absorber Exploded Diagram (F2858-Q)

Exploded parts

Titan Engines Install Notes, Core Return & Warranty Info Sheet - Ocala FL

Service procedure

1994 Ford Bronco Door Jamb VIN Data Plate - GVWR, Axle & Paint Codes

Spec plate

Ford Transmission Pan Identification Chart - C4, C5, C6, AOD, E4OD, 4R70W

Manual page

Blueprint

Heavy-Duty Headlight Harness 1980-96 Ford Bronco/Truck - Part Numbers & Prices

Brochure

1988 Ford 5.8L Calibration 8-64H-R00 VECI Label & Parts List (E8AE-9C485 AGA)

Vacuum routing

Ford Bronco/F-Series Fuse 18 (10A) - Speedometer, Air Bag, Shift Control

Fuse chart

Driveshaft Operating Angle vs Shaft RPM Chart - Pinion Angle at Speed

Torque spec

Serpentine drive belt routing diagram for Ford 5.0L and 5.8L engines with idler-tensioner instructions.

Part of 1992-1996 Ford Bronco Schematics

AI caption November 2011 · Photo 392 of 2998

This is a bilingual (English/French) factory underhood decal showing the serpentine drive belt routing for Ford 5.0L and 5.8L V8 engines, photographed on a vehicle identified by the uploader as a 1994 Ford Bronco. The label diagrams the belt path around eight pulleys: alternator (ALT.), idler pulley, belt tensioner, air pump (Thermactor/smog pump), engine fan, crankshaft, A/C compressor (or idler pulley on non-A/C vehicles), and power steering pump. An illustration shows a hand using a ratchet/wrench on the idler pulley bolt, with the instruction to lift counterclockwise using the idler pulley bolt to relieve belt tension when installing or removing the belt. All labels and instructions are repeated in French (e.g., POULIE FOLLE, TENDEUR, POMPE À AIR, VENTILATEUR, VILEBREQUIN, CLIM., DIR.). The decal carries Ford part number F3TA-8B656-BA. A reader can learn the correct serpentine belt routing sequence for these engines and the proper method for releasing tensioner pressure during belt replacement. The label is weathered with some paint/rust damage obscuring small portions of the belt path near the top right, but all text remains readable.

Is this accurate? Sign in to help verify it.

Frequently asked questions

How do you relieve serpentine belt tension on the Ford 5.0L/5.8L?: Per the decal, lift counterclockwise using the idler pulley bolt to relieve tension (using a wrench/ratchet on the bolt as shown in the illustration).
What pulleys does the drive belt route around on the 5.0L and 5.8L?: The diagram shows the belt routing around the alternator, idler pulley, tensioner, air pump, fan, crankshaft, A/C compressor (or idler on non-A/C trucks), and power steering pump.
Which engines does this belt routing diagram apply to?: The label states it covers 5.0L & 5.8L drive belt installation (Moteur 5,0 L ou 5,8 L).
What is the Ford part number on this belt routing decal?: F3TA-8B656-BA is printed along the right edge of the label.
What if my truck doesn't have air conditioning?: The diagram labels one pulley as 'A/C OR IDLER,' indicating an idler pulley takes the place of the A/C compressor on non-A/C vehicles.