Home/
Registry/
Ford/
Bronco/
1992-1996/
“Buckin Bronco”/
Photo
supermotors.net/registry/media/1120102
Ford 5.8L California PCM C185 Connector Pinout - 60-Pin Wiring Diagram
Reference · 1992-1996 BroncoAll 411 wiring diagrams
Powertrain control module C185 connector pinout diagram and chart listing each pin number, circuit and function for the 5.8L California engine.
Part of 1992-1996 Ford Bronco Wiring Diagrams
This document is a connector pinout reference for the C185 Powertrain Control Module (PCM) connector on a 5.8L California-emissions Ford vehicle. It shows a diagram of the gray 60-pin PCM connector with circuit numbers and wire color codes labeled at each cavity, followed by two tables listing all 60 pins with their circuit number, wire color, and circuit function. Functions covered include B+ Keep Alive power, Brake On/Off switch, Vehicle Speed Sensor input and ground, Ignition Diagnostic Monitor, Engine Coolant Temperature sensor, Fuel Pump monitor and enable, Mass Air Flow sensor, all eight fuel injectors (circuits 555-562), Malfunction Indicator Lamp, VIP data link connector pins, Idle Air Control valve, Intake Air Temperature sensor, EGR valve position and EGR control solenoid, SPOUT, Transmission Range sensor, transmission shift solenoids #1 and #2, Torque Converter Clutch solenoid, Coast Clutch solenoid, Transmission Fluid Temperature sensor, Transmission Control Switch and Indicator Lamp, Trans-Electronic Pressure Control, Crankshaft Position sensor, Throttle Position sensor, Heated Oxygen Sensor inputs, 4x4 low range indicator lamp, grounds, and unused pins. A reader can identify any PCM pin's function and wire color for diagnostics, wiring repairs, or ECU swaps.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What color is the C185 PCM connector for the 5.8L California engine?
- The document labels it as C185 (GRAY), the Powertrain Control Module (PCM) connector.
- Which PCM pins control the fuel injectors on the 5.8L California?
- Pin 58 (555 T) Injector #1, pin 59 (556 W) #2, pin 39 (557 BR/Y) #3, pin 35 (558 BR/LB) #4, pin 15 (559 T/BK) #5, pin 12 (560 LG/O) #6, pin 13 (561 T/R) #7, and pin 14 (562 LB) #8.
- What pin is the Throttle Position (TP) sensor input on this PCM connector?
- Pin 47, circuit 355 with GY/W (gray/white) wire, is the Throttle Position (TP) Sensor Input.
- Which pins on the C185 connector are grounds?
- Pin 16 (259 O/R) is Ignition Ground, pin 20 (57 BK) is PCM Case Ground, and pins 40 and 60 (570 BK/W) are Ground.
- What pin carries the Crankshaft Position (CKP) sensor signal?
- Pin 56, circuit 395 with GY/O (gray/orange) wire, is the Crankshaft Position (CKP) Sensor.
No comments yet.