What is the Ford part number for the Bronco roll bar assembly?

The bar assembly is 9851868-AWA (shown as roll bar assembly 9851868 in View A), with pad 98518N00.

What hardware attaches the roll bar brace on a Ford Bronco?

The brace assembly 9851876-7 attaches with crown nut 34164-S40 and nut 382802-S2, plus a retainer assembly (View B); at the upper end the brace/bar uses bolt 379690-S2 and nut 34977-S2.

What sealer is used at the roll bar floor mounts?

Sealer meeting Ford spec ESB-M4G32-A (gray or black) is applied at the floor mounting points, shown in Views A and C.

What retainer assemblies are used under the floor for the roll bar?

Retainer assembly 98518A96-A is shown in View A, and retainer assembly 98518-A-88-A with clip 358790 is shown in View C.

What bolt secures the roll bar base to the floor?

Bolt 56741-S2 is shown securing the roll bar assembly base in View A.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ “The Bronco”/ Photo supermotors.net/registry/media/254889

Ford Bronco Roll Bar Exploded Diagram - Bar, Brace & Mounting Part Numbers

Bronco roll bar and brace assembly installation diagram with part numbers

‹ ›

Assembly diagram of a Bronco roll bar and brace with part numbers, bolts and retainer details across multiple views.

AI caption October 2005 · Photo 146 of 277

This document is an exploded parts diagram showing the roll bar installation for a Ford Bronco. The main illustration depicts the roll bar (bar assembly 9851868-AWA) with its pad (98518N00) mounted inside the Bronco body at the B-pillar area, secured with a bolt (379690-S2) and nut (34977-S2), plus a rear brace assembly (9851876-7) extending down to the floor. Arrows indicate locations of three detail views. View A shows the roll bar assembly (9851868) base mounting through the floor with bolt 56741-S2, sealer (gray or black, spec ESB-M4G32-A), and retainer assembly 98518A96-A underneath. View B details the brace assembly (9851876-7) attachment using crown nut 34164-S40, nut 382802-S2, and a retainer assembly. View C shows the underside retainer assembly (98518-A-88-A) with clip 358790 and sealer ESB-M4G-32A applied around the mounting studs. A reader can learn the correct hardware part numbers, sealer specification, and the fastening arrangement for installing or reinstalling the factory roll bar and its rear braces in a Ford Bronco, including where sealer and retainers are applied beneath the floor pan.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is the Ford part number for the Bronco roll bar assembly?: The bar assembly is 9851868-AWA (shown as roll bar assembly 9851868 in View A), with pad 98518N00.
What hardware attaches the roll bar brace on a Ford Bronco?: The brace assembly 9851876-7 attaches with crown nut 34164-S40 and nut 382802-S2, plus a retainer assembly (View B); at the upper end the brace/bar uses bolt 379690-S2 and nut 34977-S2.
What sealer is used at the roll bar floor mounts?: Sealer meeting Ford spec ESB-M4G32-A (gray or black) is applied at the floor mounting points, shown in Views A and C.
What retainer assemblies are used under the floor for the roll bar?: Retainer assembly 98518A96-A is shown in View A, and retainer assembly 98518-A-88-A with clip 358790 is shown in View C.
What bolt secures the roll bar base to the floor?: Bolt 56741-S2 is shown securing the roll bar assembly base in View A.