Ford Traction-Lok Limited Slip Differential Exploded Diagram & Clutch Pack Parts

This document contains two Ford service-manual illustrations of a Traction-Lok limited-slip rear axle differential. The upper figure (illustration AE0127-A) is a cutaway view of the differential case identifying major internal components with Ford base part numbers: the differential clutch pack (4947), which is noted to include four steel plates, three friction plates, and one rear axle differential clutch shim (4A324); the differential clutch spring (4214); the differential side gear (4236); and the differential pinion gear (4215). The lower figure (illustration AE0128-A) is an exploded parts view of the same limited-slip differential, showing the differential case, both side gears, pinion gears, the pinion shaft, thrust washers/spacer block, and the full stack-up order of the clutch pack discs and shims on both sides. The exploded view uses numbered callouts 1 through 9 plus a callout "A", though no legend for these numbers appears on this page (it is likely on an accompanying page in the manual set). A reader can learn the part numbers for the clutch pack components and the correct assembly sequence/orientation of the clutch discs, gears, and shims within a Traction-Lok differential.