1978 Ford Bronco Door Hinge Diagram - Hinge Part Numbers, Sealer & Torque Specs
Reference · 1978-1979 BroncoAll 79 exploded parts diagrams
Assembly diagram of upper and lower door hinges with mounting screws and sealer, including torque specifications.
Part of 1978-1979 Ford Bronco Exploded Parts Diagrams
This exploded parts diagram shows the front door hinge installation on a Ford truck/Bronco body. It illustrates the door (part reference 2014-5) alongside the door pillar section of the body, with an arrow indicating the front of the body for orientation. Two hinges are shown: the upper hinge (part number 22800) and the lower hinge (part number 22806), each mounted with sealer applied between the hinge plates and the body/door surfaces. The specified sealer is ESB-M2G150-A or equivalent. Both hinges are secured with screws, part number 388053, which must be tightened to 19-32 N·m (14-24 ft-lb). The diagram uses phantom lines and directional arrows to show how the door aligns with the hinges and the body pillar. A reader can learn the correct part numbers for upper and lower door hinges and attaching screws, the required sealer specification, and the proper torque values for the hinge attaching screws when removing, replacing, or adjusting the door hinges.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What is the torque spec for the Ford Bronco door hinge screws?
- The hinge screws (part 388053) should be tightened to 19-32 N·m (14-24 ft-lb).
- What are the part numbers for the upper and lower door hinges?
- The upper hinge is part 22800 and the lower hinge is part 22806.
- What sealer is used when installing the door hinges?
- Sealer ESB-M2G150-A or equivalent is applied between the hinges and the mounting surfaces.
- What screw is used to attach the door hinges?
- Screw part number 388053 is used for both the upper and lower hinges.
No comments yet.