What torque value is specified in this diagram?

The fasteners indicated by callout (2) are to be tightened to 149-201 Nm (110-148 lb/ft).

What do the numbered callouts in the diagram indicate?

Callout (2) points to the fasteners that require the 149-201 Nm (110-148 lb/ft) torque; callout (1) points to a lower component near a large circular bore, but no torque or label is given for it in the visible text.

Is there a figure or reference number on this diagram?

Yes, the illustration is marked GF0796-A in the lower right corner.

Does the document state which vehicle or model years it applies to?

No. The diagram contains only the torque value and figure code; no year, make, model, or engine applicability is shown.

Home/ Registry/ Ford/ Mustang/ 2005-2014/ “SHELBY GT500”/ Photo supermotors.net/registry/media/655668

Ford Hub/Knuckle Fastener Torque Spec Diagram 149-201 Nm (110-148 lb/ft) GF0796-A

Intake manifold line drawing with torque spec 149-201 Nm and numbered fasteners

‹ ›

Service manual drawing of an intake/exhaust manifold with torque specification 149-201 Nm (110-148 lb-ft) and numbered callouts.

AI caption July 2008 · Photo 82 of 4867

This document is a single automotive torque specification illustration, identified by the figure code GF0796-A. It shows a line drawing of a suspension/hub or steering knuckle area of a vehicle, viewed from an angle showing what appears to be a control arm, knuckle, and adjacent components. Two numbered callouts are present: callout (1) points to a lower component near a large circular bore (likely a hub or ball joint area), and callout (2) points to multiple fasteners in the upper area of the assembly. A torque specification box is linked to callout (2) fasteners, specifying a tightening torque of 149-201 Nm (110-148 lb/ft). The document contains no other text — no part numbers, model years, or written procedure steps are visible. A reader can learn the required torque value (149-201 Nm / 110-148 lb/ft) for the fasteners indicated by callout (2) in this assembly. The uploader filed it as a hub-related torque spec ('hub7.gif') in an album containing many Ford truck (F-150 era) service diagrams, though the illustration itself does not state which vehicle or component it applies to.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What torque value is specified in this diagram?: The fasteners indicated by callout (2) are to be tightened to 149-201 Nm (110-148 lb/ft).
What do the numbered callouts in the diagram indicate?: Callout (2) points to the fasteners that require the 149-201 Nm (110-148 lb/ft) torque; callout (1) points to a lower component near a large circular bore, but no torque or label is given for it in the visible text.
Is there a figure or reference number on this diagram?: Yes, the illustration is marked GF0796-A in the lower right corner.
Does the document state which vehicle or model years it applies to?: No. The diagram contains only the torque value and figure code; no year, make, model, or engine applicability is shown.