Ford Front Suspension Bolt Torque Spec Diagram 164-200 Nm (121-148 lb/ft) F8991-C

This document is a single Ford service-manual style illustration (figure number F8991-C) showing a torque specification for a chassis/suspension fastener area. The line drawing depicts what appears to be a front suspension area with a coil spring at the top and a lower control arm or spindle assembly below, with two numbered callouts: callout 1 pointing to an area at the upper right of the assembly, and callout 2 pointing to two threaded fasteners (bolts/studs) in the lower center of the assembly. A boxed torque specification at the bottom of the image reads '164-200 Nm (121-148 lb/ft)', which applies to the fasteners indicated by the callout arrows. No accompanying legend, part numbers, vehicle model, or year information is printed on the illustration itself, so the reader learns only the tightening torque range for the indicated fasteners and the relative locations of the two callout points. The figure reference 'F8991-C' in the lower right corner identifies the illustration within Ford's service literature. Readers servicing the depicted suspension components can use this figure to identify which fasteners require the 164-200 Nm torque value.