Ford Transfer Case Fill Plug Torque Spec Diagram - 24 Nm (18 lb-ft)

This document is a single line-art illustration showing a torque specification for a fill plug on what appears to be a transfer case or transmission/transaxle case housing. The drawing depicts the side of an aluminum case with ribbed webbing and bolt bosses, with an arrow and callout box pointing to a threaded plug located low on the case. The callout specifies a tightening torque of 24 Nm (18 lb-ft) for this plug. The only other text visible is the Ford illustration reference number A0044750 in the lower-left corner. No vehicle year, model, engine, or part numbers are stated on the image itself. A reader can learn from this document the correct torque value (24 Nm / 18 lb-ft) to apply when reinstalling the fill (or drain) plug shown, and the plug's approximate location on the case. The document contains no legend, table, wiring information, or additional procedural steps, it is a standalone torque-spec callout figure typical of Ford factory service manual artwork.