What size is the M&H Racemaster front drag tire on this label?

4.5/26.0-17 Front Drag, part code PK2JC, Tube Type Nylon, Blackwall, 4 Ply Rating.

What is the maximum pressure to seat the beads on these M&H tires?

Never exceed 40 PSI to seat beads on the 4.5/26.0-17 front drag tire, and never exceed 35 PSI to seat beads on the 10.0/26.0-15 M&H Drag tire.

Are M&H Racemaster drag tires street legal?

No. The warranty policy states race tires are not tested or labeled to meet FMVSS109/ECE36 safety standards and it is illegal to use the product on the street or highway.

Does M&H offer a warranty on these race tires?

No. The label states there is NO warranty, guarantee, or liability, expressed or implied, including merchantability or fitness — race tires are sold as-is.

Can I use tread softener on M&H Racemaster tires?

No. The label says never attempt to chemically treat or alter the tire or tread compound, such as soaking or using tread softener, as this could cause premature or catastrophic tire failure with serious injury or death.

Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “EVIL VIC”/ Photo supermotors.net/registry/media/1028111

M&H Racemaster Drag Tire Labels: 4.5/26.0-17 Front Drag & 10.0/26.0-15 Drag

M&H Racemaster front and rear drag tire box labels with sizes, specs and warranty text

M&H Racemaster drag tire box labels listing tire sizes, construction specs and warranty warnings.

AI caption June 2014 · Photo 0 of 5000

This photo shows two M&H Racemaster drag racing tire box labels affixed to a cardboard shipping box. The left label identifies a 4.5/26.0-17 Front Drag tire, part code PK2JC, described as Tube Type Nylon, Blackwall, 4 Ply Rating, with barcode MSS-017. Its warning text covers safe mounting procedures: use a proper rim, refer to RMA Manual and Bulletins or Vehicle Manual, clean and lubricate the rim and beads, install the valve core, lock the wheel on the mounting machine or use a safety cage, use an extension gauge and clip-on air chuck, and never exceed 40 PSI to seat beads. The right label identifies a 10.0/26.0-15 M&H Drag tire, code JVTW6, barcode MHR-064. It includes the M&H warranty policy stating race tires are sold as-is with no warranty, are not tested to FMVSS109/ECE36 standards, are illegal for street or highway use, and must never be chemically treated or soaked with tread softener. Its warning specifies trained personnel, T&RA-spec wheels, safety cage use, and never exceeding 35 PSI to seat beads. The document tells a reader tire sizes, construction type, part codes, maximum bead-seating pressures, and M&H's warranty and safety policies.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What size is the M&H Racemaster front drag tire on this label?: 4.5/26.0-17 Front Drag, part code PK2JC, Tube Type Nylon, Blackwall, 4 Ply Rating.
What is the maximum pressure to seat the beads on these M&H tires?: Never exceed 40 PSI to seat beads on the 4.5/26.0-17 front drag tire, and never exceed 35 PSI to seat beads on the 10.0/26.0-15 M&H Drag tire.
Are M&H Racemaster drag tires street legal?: No. The warranty policy states race tires are not tested or labeled to meet FMVSS109/ECE36 safety standards and it is illegal to use the product on the street or highway.
Does M&H offer a warranty on these race tires?: No. The label states there is NO warranty, guarantee, or liability, expressed or implied, including merchantability or fitness — race tires are sold as-is.
Can I use tread softener on M&H Racemaster tires?: No. The label says never attempt to chemically treat or alter the tire or tread compound, such as soaking or using tread softener, as this could cause premature or catastrophic tire failure with serious injury or death.