How do you remove an emblem from a 1996 Ford F-250 or F-350 without damaging paint?

Clean the sheet metal around the emblem with isopropyl alcohol and a clean soft cloth, mark the emblem location with masking tape, then use a nylon wedge positioned between the emblem and the sheet metal and pull the emblem away with steady tension. Once an edge is free, grip it and slowly pull the edge toward the front of the vehicle. Use care to prevent damage to paint or sheet metal.

Should heat be used to remove Ford truck emblems?

No. The manual notes not to heat the emblem or sheet metal because it will increase adhesion and make removal difficult. Cold temperatures of 0°C (32°F) and below actually make the emblem easier to remove.

Where is the diesel nameplate located on 1996 F-250/F-350 trucks?

The diesel nameplate (plate assembly) mounts on the tailgate; the manual shows two configurations, one without a finish panel and one with a finish panel.

Where do the 7.3L Power Stroke Diesel emblems go on a 1996 Ford truck?

The manual illustrates the Power Stroke Diesel emblem on the body side panel and the combined F-250 XL / Power Stroke Diesel emblem on the front fender.

What vehicles does this manual page cover?

Per the footer, it is from the 1996 F-150, F-250, F-350, Bronco, F-Super Duty Body, Chassis manual, dated July 1995.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1996 Ford Bronco/ Photo supermotors.net/registry/media/1136806

1996 Ford F-250/F-350 Diesel Nameplate & Power Stroke Emblem Removal - 01-08-7

Ford service manual page, exterior trim removal and installation, diesel nameplate and 7.3L Power Stroke emblems with figures

‹ ›

Ford service manual page covering exterior trim and emblem removal and installation for F-250/F-350, with labeled tailgate nameplate and Power Stroke emblem illustrations.

AI caption July 2018 · Photo 375 of 413

This is page 01-08-7, "Trim, Exterior," from the 1996 Ford F-150/F-250/F-350/Bronco/F-Super Duty Body and Chassis service manual (dated July 1995), covering removal and installation of exterior trim and emblems. The left column shows two exploded illustrations of the diesel nameplate (plate assembly) on the tailgate of F-250 and F-350 trucks, depicting configurations both without and with a tailgate finish panel (figure N9925-C). The right column illustrates emblem placement for the 7.3L diesel engine, showing the "Power Stroke Diesel" emblem location on the body side panel and the "F-250 XL / Power Stroke Diesel" emblem on the front fender. The text section provides a four-step emblem removal procedure: clean the surrounding sheet metal with isopropyl alcohol, mark the emblem location with masking tape, carefully pry the emblem loose with a nylon wedge (with a caution against damaging paint and a note that heat increases adhesion while cold temperatures of 0°C/32°F ease removal), and finally grip the freed edge and pull it slowly toward the front of the vehicle. Faint bleed-through from adjacent pages (part-number tables) is visible but not part of this page's content.

Is this accurate? Sign in to help verify it.

Frequently asked questions

How do you remove an emblem from a 1996 Ford F-250 or F-350 without damaging paint?: Clean the sheet metal around the emblem with isopropyl alcohol and a clean soft cloth, mark the emblem location with masking tape, then use a nylon wedge positioned between the emblem and the sheet metal and pull the emblem away with steady tension. Once an edge is free, grip it and slowly pull the edge toward the front of the vehicle. Use care to prevent damage to paint or sheet metal.
Should heat be used to remove Ford truck emblems?: No. The manual notes not to heat the emblem or sheet metal because it will increase adhesion and make removal difficult. Cold temperatures of 0°C (32°F) and below actually make the emblem easier to remove.
Where is the diesel nameplate located on 1996 F-250/F-350 trucks?: The diesel nameplate (plate assembly) mounts on the tailgate; the manual shows two configurations, one without a finish panel and one with a finish panel.
Where do the 7.3L Power Stroke Diesel emblems go on a 1996 Ford truck?: The manual illustrates the Power Stroke Diesel emblem on the body side panel and the combined F-250 XL / Power Stroke Diesel emblem on the front fender.
What vehicles does this manual page cover?: Per the footer, it is from the 1996 F-150, F-250, F-350, Bronco, F-Super Duty Body, Chassis manual, dated July 1995.