Hyundai Genesis Coupe TPS Adaptation (Reset) Procedure After ETC/ECM Replacement

This document is a service notice excerpt describing the Throttle Position Sensor (TPS) adaptation procedure that must be performed after replacing the Electronic Throttle Control (ETC) assembly or the Engine Control Module (ECM). The procedure is simple: turn the ignition "OFF" and then "ON" without cranking the engine, then wait 10 seconds while the enable conditions are met. The stated enable conditions are: battery voltage above 10V, intake air temperature above 5.3°C (41.5°F), and engine coolant temperature between 5.3°C (41.5°F) and 99.8°C (211.6°F). The scan was uploaded to a 2010 Hyundai Genesis Coupe gallery as part of a set of factory service manual excerpts. The document itself contains no explicit year, make, or model identification, but it provides the exact procedure and threshold values a technician or owner would need to relearn the throttle position after ETC or ECM service. A reader learns when the adaptation is required, how to perform it, and the environmental/electrical conditions under which the adaptation will succeed.