Where does the RFI capacitor mount on the 5.0L engine?

It mounts to the coil assembly, the illustration shows the 18801 capacitor attached to the 12029 coil and bracket assembly using a 40904-S36 screw, with a 9D930 wiring assembly.

What is part 10316 in this diagram?

10316 is the Voltage Regulator Assembly, noted as not used with the Ambulance Package, shown in the E-Series 1G alternator capacitor installation.

What screws are used to attach the capacitors?

The legend lists a 40904-S36 screw (item 2), an N803991-S36 screw (item 9), and a screw that is part of the 12029 coil and bracket assembly (item 5).

Home/ Registry/ Ford/ Bronco/ 1980-1986/ “That dirty old truck”/ Photo supermotors.net/registry/media/1168379

1987-95 Ford Ignition RFI Capacitor Installation Diagram - 4.9L 5.0L 5.8L 7.5L

1987-95 ignition RFI capacitor installation diagrams with numbered parts legend by engine

‹ ›

Reference · 1980-1986 BroncoAll 61 exploded parts diagrams

Dana 50 IFS Front Axle Exploded Parts Diagram - Ford Part Numbers

Ford FS-6 A/C Compressor Exploded Diagram - Clutch, Front & Rear Head Parts

Ford Steering Column Wiring Diagram - Multi-Function Switch & Shift Interlock

1987-95 Ford Ignition RFI Capacitor Installation Diagram - 4.9L 5.0L 5.8L 7.5L

Ford Dual-Function Fuel Reservoir (Early) Diagram - Dual Tank Flow & Filter

Ford Bronco Rear Axle Brake Line & Vent Fitting Diagram - Hose & Tube Routing

5.0L/5.8L oil cooler exploded parts diagram with Ford part numbers

'92-97 headlight exploded parts diagram with Ford part numbers and park/turn lamp

61exploded parts diagrams1980-1986 Ford Bronco More reference

Wiring diagram

Ford accessories catalog page with cellular mobile telephone and 40-channel CB emergency radio

Brochure

Ford door certification label dated 11/95 with GVWR 6300LB, P235/75R15XL tires and VIN 1FMEU15H4TLA76236

Spec plate

1992 Ford E4OD Transmission Fault Code Diagnosis Chart - DTC List & Symptoms

Service procedure

Schematic

1996 Ford Bronco/F-Series Starting System - Section 03-06 Contents

Manual page

Trim panel hole layout photos for positions A, B and C with tape measure readings from the body line

Blueprint

Ford 1996 5.8L vehicle information decal with vacuum hose routing diagram and ASF-32P plug

Vacuum routing

Torque spec

'95 F150 fuse and relay chart with fuse panel layout, ATC and Maxi fuse amp tables

Fuse chart

'87-95 RFI Capacitor Installation
IF THE IMAGE IS TOO SMALL, click it.

Part of 1980-1986 Ford Bronco Exploded Parts Diagrams

Owner caption January 2022 · Photo 5930 of 6546

This document is a Ford exploded-parts reference showing installation of radio frequency interference (RFI) suppression capacitors on 1987-1995 ignition systems. Four illustrations at the top show how the capacitor assembly mounts to the ignition coil and bracket assembly for four different engines: the 5.0L (MFI), 5.8L (MFI), 4.9L (MFI) with 75-amp alternator and manual transmission, and 7.5L (MFI). A fifth illustration shows installation of a capacitor to the voltage regulator on an E-Series with a 1G alternator (regulator not used with the ambulance package). A 13-item numbered legend identifies each callout with Ford base part numbers, including the 12029 coil and bracket assembly, 18801 capacitor assembly (radio ignition interference suppression), 18832 capacitor assemblies, 9D930 wiring assembly, 10316 voltage regulator assembly, 14A404 wiring mounting plate shield assembly, 13N850 and 14305 wiring assemblies, plus 40904-S36 and N803991-S36 screws and hardware that is part of the 12029 assembly. A reader can use this to identify the correct capacitor location, mounting hardware, and part numbers for suppressing ignition RFI on these engines.

This document covers 1987-1995, which may differ from this 1983 Ford Bronco.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What part number is the Ford radio ignition interference suppression capacitor?: The legend lists item 3 as 18801 Capacitor Assembly - Radio Ignition Interference Suppression; items 6 and 11 are 18832 Capacitor Assemblies.
Which engines does this RFI capacitor installation diagram cover?: It shows capacitor installation for the 5.0L (MFI), 5.8L (MFI), 4.9L (MFI) with 75 amp alternator and manual transmission, and 7.5L (MFI) engines, plus the E-Series 1G alternator voltage regulator.
Where does the RFI capacitor mount on the 5.0L engine?: It mounts to the coil assembly, the illustration shows the 18801 capacitor attached to the 12029 coil and bracket assembly using a 40904-S36 screw, with a 9D930 wiring assembly.
What is part 10316 in this diagram?: 10316 is the Voltage Regulator Assembly, noted as not used with the Ambulance Package, shown in the E-Series 1G alternator capacitor installation.
What screws are used to attach the capacitors?: The legend lists a 40904-S36 screw (item 2), an N803991-S36 screw (item 9), and a screw that is part of the 12029 coil and bracket assembly (item 5).