1993 Ford Probe Custom Box Enclosure Blueprint - Front Piece & Side Panel Layout

This document is a simple construction blueprint/sketch, uploaded to a 1993 Ford Probe gallery, showing how to build a rectangular box-style enclosure from flat panels. On the left is a three-dimensional isometric outline of the assembled enclosure — a deep rectangular box with an open framed front. On the right, two labeled views detail the individual pieces. "Front View - Front Piece" shows the front face as a rectangle with a rectangular cutout in its center; a small dimension marker on its border is labeled "2x Thickness of Material," indicating the front frame border width equals twice the material thickness. Below it, "Front View - Sides" shows the four side pieces: two tall narrow vertical strips and two long narrow horizontal strips, which form the walls of the box. No dimensions in inches or millimeters, no part numbers, no vehicle-specific labels, wiring, or fuse information appear anywhere in the drawing. A reader can learn the general panel layout and cut list concept for the enclosure — likely a custom fabrication project (such as a speaker box, gauge enclosure, or storage cubby) associated with the owner's vehicle — but must supply their own measurements.