What is the torque spec for the valve body bolts shown in this diagram?

The torque callout in the diagram specifies 9-11 Nm (80-97 lb/in) for the bolt indicated by callout 2.

What step follows the valve body diagram on this page?

The partially visible instruction below the diagram reads 'Install the accumulator body.'

What figure or illustration number is on this diagram?

The illustration is marked AD1483-B in the lower right corner.

Does this page identify the vehicle year or transmission model?

No. The visible portion of the page shows only the valve body illustration, the torque callout, the figure ID, and part of an installation step; no year, model, or transmission name is printed.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Black Iron Horse”/ Photo supermotors.net/registry/media/755030

1996 Ford Bronco Transmission Valve Body Torque Spec 9-11 Nm (80-97 lb-in) Diagram

Service figure of accumulator body install with torque spec of 9-11 Nm (80-97 lb-in)

‹ ›

Service figure for installing the accumulator body, calling out a torque specification of 9-11 Nm (80-97 lb-in).

AI caption September 2009 · Photo 109 of 142

This document is a photographed page from a Ford service manual procedure, showing an illustration of an automatic transmission valve body (viewed with the pan removed). The diagram includes two numbered callouts: callout 1 points to a feature on the upper valve body area (unlabeled in the visible portion), and callout 2 points to a bolt location accompanied by a torque specification box reading 9-11 Nm (80-97 lb/in). The figure carries the illustration ID AD1483-B in its lower right corner. Below the diagram, a partially visible instruction step reads 'Install the accumulator body,' indicating this page is part of a transmission reassembly procedure (likely valve body and accumulator body installation). The page was uploaded to a 1996 Ford Bronco gallery and is classified as a torque-spec document; it appears to be one page of a multi-page set. From this page a reader can learn the valve-body bolt torque value (9-11 Nm / 80-97 lb-in) and the sequence point at which the accumulator body is installed during reassembly. No year, model, engine, or transmission designation is printed on the visible portion of the page.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is the torque spec for the valve body bolts shown in this diagram?: The torque callout in the diagram specifies 9-11 Nm (80-97 lb/in) for the bolt indicated by callout 2.
What step follows the valve body diagram on this page?: The partially visible instruction below the diagram reads 'Install the accumulator body.'
What figure or illustration number is on this diagram?: The illustration is marked AD1483-B in the lower right corner.
Does this page identify the vehicle year or transmission model?: No. The visible portion of the page shows only the valve body illustration, the torque callout, the figure ID, and part of an installation step; no year, model, or transmission name is printed.