Ford Bronco Wheel Alignment Diagram - Camber, Caster & Toe-In Explained

This is a scanned manual page (figure 22.1, "Typical alignment details") illustrating the three fundamental front-end wheel alignment angles using three labeled diagrams. The first diagram, "Camber Angle (Front View)," shows a tire viewed from the front with a vertical reference line and the vehicle centerline; measurements A and B are taken from the centerline, and A minus B equals C, the camber angle in degrees. The second diagram, "Caster Angle (Side View)," shows a wheel from the side with a vertical line and the centerline of the ball joint axis; angle D is the caster, measured in degrees, with an arrow indicating the front of the vehicle. The third diagram, "Toe-In (Top View)," shows both front wheels from above with measurements F (front of the tires) and E (rear of the tires); E minus F equals toe-in, measured in inches, while G expresses toe-in in degrees. A legend at the bottom summarizes all four formulas. The page teaches readers how camber, caster, and toe-in are defined and measured, providing a visual reference for understanding front suspension alignment terminology. No specific vehicle, year, specification values, or part numbers appear on the page.