2010 Hyundai Genesis Coupe Audio Wiring Diagram SD961-4 - JBL Amp, USB & AUX
Wiring diagram of an amplified audio system showing M-CAN, USB, and AUX jack circuits with color-coded wires and pin numbers.
This document is page SD961-4 of a Hyundai factory wiring diagram covering the Audio System (4), specifically the 'With AMP' (JBL amplifier) configuration. It shows the M-CAN communication lines (High/Low) and SPDIF digital audio output lines (Out (-) / Out (+)) running from the JBL AMP (connector F04-A) through intermediate connector MF31 and joint connector JM06 (with a cross-reference to Data Link Details on SD200-3) to the AUDIO head unit connectors M03-B and M03-A. Wire gauges/colors such as 0.3R, 0.3L, 0.3W, 0.3G, 0.3B, and 0.3W/B are labeled throughout. The lower half details the head unit's USB and AUX circuits from connector M03-B (USB/iPod VOD, USB D-, USB D+, USB/iPod GND, AUX DETECT, L_IN, R_IN, GND) down to the AUX & USB JACK at connector M25, including pin numbers, wire colors (0.3Y, 0.3Gr, 0.3O, 0.3Br/B, 0.3P), an illumination feed cross-referenced to SD941-2, a shield ground, and chassis ground point GM05. Photo callouts (PHOTO 66, 68, 72, 90, 114, 121) reference connector location photos. A reader can trace amplifier data/audio signal wiring and USB/AUX jack pinouts for diagnosing audio system faults.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What connector is used at the JBL amplifier in this diagram?
- The AMP (JBL) uses connector F04-A, with M-CAN High on pin 8, M-CAN Low on pin 7, SPDIF Out (-) on pin 18, and SPDIF Out (+) on pin 19.
- What are the head unit pins for the USB and AUX inputs?
- On connector M03-B: pin 7 USB/iPod VOD (0.3Y), pin 18 USB D- (0.3B), pin 6 USB D+ (0.3W), pin 19 USB/iPod GND (0.3Gr), pin 20 AUX DETECT (0.3B), pin 21 AUX L_IN (0.3L), pin 8 AUX R_IN (0.3R), pin 9 AUX GND (0.3O).
- Where does the AUX & USB jack ground?
- The AUX & USB JACK (connector M25) grounds at chassis ground point GM05, and it also has a Shield Ground on pin 15 for the AUX circuit.
- What other diagram pages are referenced for related details?
- The joint connector JM06 data link details are on SD200-3, and the illumination circuit for the jack's ILL (+) wire is covered on SD941-2.
- What signal lines run between the head unit and the JBL amplifier?
- M-CAN High/Low communication lines and SPDIF digital audio Out (-)/Out (+) lines run between the AUDIO unit (connectors M03-B and M03-A) and the AMP, passing through connectors MF31 and JM06.
Comments
More from this build
No comments yet.