Roll Cage Construction Diagram - Gussets, Diagonal & Rear Braces (.125"x3"x3")

This document is a scanned line-art blueprint/diagram of a tubular roll cage structure, apparently taken from a printed reference or rulebook page. The illustration shows a complete roll cage assembly with the main hoop, front hoop, roof tubes, and rear down bars mounted to frame rails. Callout arrows identify three key structural elements: 'Gussets' (with multiple arrows pointing to the bends and joints of the cage tubing where reinforcing plates are welded), 'Diagonal Braces' (arrows pointing to the crossing tubes within the cage that triangulate the structure), and rear braces (label partially cut off at the right edge, reading 'Rea.../Brac...'). Above the cage, a separate detail drawing depicts a triangular gusset plate dimensioned '.125"x3"x3"', indicating the gussets are to be made from 1/8-inch-thick plate measuring 3 inches by 3 inches. A reader can learn where gussets and diagonal bracing should be placed on a roll cage and the required gusset plate size. The document contains no vehicle year, make, model, part numbers, or other text; it is purely a construction/placement diagram for roll cage reinforcement.