1992-94 BRONCO/F-SERIES RIGHT HAND INSTRUMENT PANEL TAB REPLACEMENT/INSTALLATION INSTRUCTIONS NOTE: For Steps 1-7 and 16-23, refer to the 1994 Bronco/F-Series Service Manual, Section 01-12A, for assistance. NOTE: It is important for your hands and all equipment used to be free of grease or oil. Grease or oil can degrade plastic parts of the instrument panel, making them weak and less resistant to fracture. _L . Disconnect the battery ground cable. Remove the right and left kick panel. Remove the right side windshield garnish molding. Remove the screw securing the broken right hand lower attachment. Remove the two screws connecting the bottom of the instrument panel to the two braces. Remove four (4) cowl top attaching screws. Remove the steering column opening cover. Loosen the three (3) bolts securing the left hand side of the instrument panel to the vehicle. Refer to Figure 1. CAUTION: Do not remove the bolts. :22 PNPS"PPN LOOSEN 3 BOLTS Figure 1 1.3. 6551 SHEET 1 OF 5 CPR 1994 FORD MOTOR COMPANY 1992'94 BRONCO/FSERIES DEARBORN. MICHIGAN 48121 RIGHT HAND INSTRUMENT PANEL TAB +94 REPLACEMENT/INSTALLATION INSTRUCTIONS