13. Using the bracket as a template, drill a 1/4" hole through the lower hole of the bracket into the duct. Refer to Figure 6. NOTE: Make sure the bracket is pressed firmly against the duct before drilling. a. a 09/0 3 l// g: l s 4, 1; P ,r I Figure 6 i {5 14. Attach the bracket at the bottom with a truss head rivet. Refer to Figure 7. Figure 7 LS. 6551 SHEET 4 OF 5 CPR 1994 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 4-94 1 992-94 BRONCO/FSERIES RIGHT HAND INSTRUMENT PANEL TAB REPLACEMENT/INSTALLATION INSTRUCTIONS