What dimensions are shown on the sketch?

The drawing is labeled 21 inches across the top, 32 inches for the vertical dimension on the right, and a 3 1/2 x 3 1/2 inch kick at the base.

What do the notes on the right side of the page say?

They read approximately 'Total cal / Base cab / Right Side / 60" / 3 20" wide / 21 Deep,' suggesting three 20-inch-wide, 21-inch-deep sections totaling 60 inches.

What calculation is written in the upper right corner?

A subtraction: 38 (or 38 1/2) minus 3 1/2 equals 34 1/2.

Does this document contain any fuse, wiring, or Ford Bronco-specific information?

No. It is a hand-drawn dimensional sketch only, with no vehicle, electrical, or part-number information visible.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ “mean green”/ Photo supermotors.net/registry/media/903748

Hand-Drawn Cabinet/Storage Box Sketch with Dimensions - 1996 Ford Bronco Gallery

Hand-drawn dimensioned sketch of a box enclosure with measurements 20 inch and 32 inch

‹ ›

Hand-drawn dimensioned build sketch of an enclosure with measurements and calculations on notebook paper.

AI caption January 2012 · Photo 1112 of 1623

This document is a single page from a lined notepad containing a freehand pencil sketch, apparently a perspective drawing of a base cabinet or similar built-in structure, with handwritten dimensions and notes. The drawing shows a rectangular box shape with dimension callouts of 21 inches (width/depth across the top), 32 inches (height on the right side), and a "3 1/2 x 3 1/2 kick" notation at the bottom, suggesting a toe-kick recess typical of cabinetry. Handwritten arithmetic in the upper right subtracts 3 1/2 from 38 (or 38 1/2) to get 34 1/2. Diagonal notes on the right side read approximately "Total cal / Base cab / Right Side / 60" / 3 20" wide / 21 Deep," indicating a plan for three 20-inch-wide, 21-inch-deep units totaling 60 inches, and a note "3) 96" appears in the lower right. Despite being filed under a 1996 Ford Bronco gallery as a "blueprint," the page contains no automotive content, vehicle references, part numbers, fuse data, or wiring information. A reader can learn only the rough dimensions of a planned cabinet or storage-box project sketched by the owner.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What dimensions are shown on the sketch?: The drawing is labeled 21 inches across the top, 32 inches for the vertical dimension on the right, and a 3 1/2 x 3 1/2 inch kick at the base.
What do the notes on the right side of the page say?: They read approximately 'Total cal / Base cab / Right Side / 60" / 3 20" wide / 21 Deep,' suggesting three 20-inch-wide, 21-inch-deep sections totaling 60 inches.
What calculation is written in the upper right corner?: A subtraction: 38 (or 38 1/2) minus 3 1/2 equals 34 1/2.
Does this document contain any fuse, wiring, or Ford Bronco-specific information?: No. It is a hand-drawn dimensional sketch only, with no vehicle, electrical, or part-number information visible.