Hand-Drawn Measurement Sketch (60 x 25/25, 3 ends) - 1996 Ford Bronco Gallery

This document is a rough hand-drawn pencil sketch on lined yellow notebook paper, photographed rather than scanned. It shows a single rectangle with dimension callouts: the long side is marked "60," with an adjacent notation that appears to read "54 B[a]s[e]" (possibly "54 Base"). The opposite side is divided into two segments each marked "25," and each end has a short "3" dimension extending past the corners. Two small stacked numeric notations appear near the corners: one reading roughly "50 / 10 / 6." and another reading roughly "2 1/3 / 18," which appear to be quick arithmetic or fraction jottings. There are no part numbers, vehicle identifiers, legends, fuse data, or wiring information anywhere on the page. The sketch appears to be a personal measurement or layout drawing, possibly for a fabrication project, panel, bed, rack, or similar rectangular structure, filed in a 1996 Ford Bronco owner's gallery. Because the document contains no vehicle-specific text, its exact purpose and applicability cannot be determined from the image alone. A reader can learn only the rough dimensions of the rectangular object being planned: approximately 60 units by 25+25 (50) units with 3-unit extensions at the corners.