Home/
Registry/
Ford/
Bronco/
1992-1996/
“Bronco The Dark Side Of The Moon”/
Photo
supermotors.net/registry/media/108887
Ford Bronco Rock Slider Blueprint - DOM Tube Step Dimensions & Parts List
Reference · 1992-1996 BroncoAll 81 blueprints
Dimensioned CAD engineering drawing of a rear step bumper with numbered callouts and a parts list of tube, plate, and brace stock.
Part of 1992-1996 Ford Bronco Blueprints
This document is a CAD blueprint (watermarked "Scheki Design") for a fabricated rock slider / step assembly, uploaded to the gallery of a 1995 Ford Bronco under the filename RocksliderBitmap.JPG. It shows a dimensioned front/side view of the assembly, a top view of the main bar with mounting plates, and an isometric 3D view. Key dimensions include an overall length of 62.00 inches, mounting-related dimensions of 4.50, 1.00, and 4.00, vertical brace lengths of 15.13 and 14.50, a 24.00 spacing between braces, and a 12.00 offset from the end. A parts list identifies seven components: a TUBE-STEP and two TUBE-1 pieces made of 2 OD x 1/4 wall DOM tubing, a REAR-MNT-PLATE and PART1 made of 1/4 x 4 x 4 1/2 CRS plate, and a REAR-BRACE, LONG BAR, and PART2 made of 2 x 4 x 1/4 wall rectangular tube. Numbered callout balloons (1, 2, 4, 5, 6, 7) tie the drawing to the parts list. A fabricator can learn the material specifications, quantities, and overall dimensions needed to build this rock slider.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What material is the rock slider step tube made from?
- The TUBE-STEP (item 7) and TUBE-1 (item 6) are made from 2 OD x 1/4 wall DOM tubing.
- How long is the rock slider assembly?
- The overall length shown on the drawing is 62.00 inches.
- What material are the mounting plates?
- The REAR-MNT-PLATE (item 5) and PART1 (item 1) are 1/4 x 4 x 4 1/2 CRS (cold rolled steel) plate.
- What is the spacing between the two vertical braces?
- The drawing shows 24.00 between braces, with a 12.00 offset from one end, and brace lengths of 15.13 and 14.50.
- What size rectangular tubing is used for the braces and long bar?
- The REAR-BRACE, LONG BAR, and PART2 use 2 x 4 x 1/4 wall rectangular tube.
No comments yet.