1996 Ford Bronco Custom Speaker Box Design Sketch - Side, Front, Back, Bottom Views
Reference · 1992-1996 BroncoAll 95 schematics
Whiteboard multi-view sketch showing side, front, back, and bottom views of a speaker box and amp enclosure with labels.
Part of 1992-1996 Ford Bronco Schematics
This is a photograph of a hand-drawn whiteboard sketch, not a printed schematic. It shows a four-view concept drawing (Side, Front, Back, Bottom) for a custom speaker/subwoofer enclosure designed to mount behind or under a vehicle seat, consistent with the uploader filing it under a 1996 Ford Bronco. The Side view shows the box angled to 'match seat angle,' with a mounting 'Bracket,' 'Slots,' a 'Brace,' and a note about an inset. The Front view shows two round speaker cutouts with stepped 'Protectors' (guards) around the corners. The Back view shows a dashed rectangle labeled 'Amp' (amplifier mounting location), two round 'Speaker Connectors,' and 'Brace' points. The Bottom view shows the box positioned relative to a dashed outline labeled 'Seat,' with a 'Bracket Slot' and a 'Brace Inside Box.' No dimensions, part numbers, wire colors, fuse data, or dates appear anywhere on the board. A reader can learn the intended construction concept: an angled, braced speaker box that slides onto seat-mounted brackets via slots, with amp mounted on the back and speaker terminals accessible externally.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What does this whiteboard drawing show?
- A four-view concept sketch (Side, Front, Back, Bottom) of a custom speaker enclosure that mounts near a vehicle seat, with the side angled to 'match seat angle.'
- How does the box attach to the vehicle?
- The Side and Bottom views show a bracket and slots, the box has a 'Bracket Slot' that engages seat-mounted brackets, plus braces including a 'Brace Inside Box.'
- Where does the amplifier mount?
- The Back view shows a dashed rectangle labeled 'Amp' on the rear panel of the enclosure, between two speaker connectors.
- Are the speakers protected?
- Yes: the Front view labels stepped corner features as 'Protectors' around the two round speaker openings.
- Does the drawing include dimensions or part numbers?
- No. The sketch contains only labels (brace, bracket, slots, amp, speaker connectors, seat, protectors) with no measurements, part numbers, or dates.
No comments yet.