Home/
Registry/
Ford/
Bronco/
1992-1996/
“Buckin Bronco”/
Photo
supermotors.net/registry/media/1110751
1996 Ford Bronco Power Distribution Wiring Diagram - Fuse 5 (15A) Circuit 298
Reference · 1992-1996 BroncoAll 411 wiring diagrams
Power distribution wiring diagram for 1996 Ford Bronco covering DRL, transmission and trailer relay circuits with color-coded wires.
Part of 1992-1996 Ford Bronco Wiring Diagrams
This document is page 13-4 of the power distribution section of a 1996 Ford Bronco wiring diagram set. It traces the circuit fed from splice S217 (page 13-3) via circuit 687 (GY/W, gray/white) through connector C202F/C202M into fuse 5, a 15A fuse in the Engine Compartment Fuse Box. From the fuse, circuit 298 (P/O, pink/orange) runs to splice S105, which distributes power to several loads: the Speed Control Servo/Amplifier Assembly via connector C152 pin 7 (page 31-1); the Daytime Running Lamps (DRL) Module via C177 pin 3, applicable only with DRL (page 97-1); through connectors C103M/C103F to either the Transmission Range (TR) Sensor via C1012 (E4OD automatic transmission, page 95-1) or the Backup Lamp Switch via C166 (manual transmission, page 95-1); and the Trailer Battery Charge Relay in the Trailer Relay Box (page 95-1). Circuit 601 (LB/PK, light blue/pink) from S105 feeds the 4WABS Relay #1 in the Trailer Relay Box and the 4WABS Control Module via C119 pin 20 (both page 42-1). Readers can learn which fuse and wire colors power the backup lamps, TR sensor, speed control, DRL module, and 4WABS circuits.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What fuse powers the backup lamp switch and transmission range sensor on a 1996 Bronco?
- Fuse 5, a 15A fuse in the Engine Compartment Fuse Box, feeds circuit 298 (P/O) which powers the TR sensor (automatic/E4OD) or the backup lamp switch (manual transmission).
- What wire color is circuit 298 in this diagram?
- Circuit 298 is shown as P/O (pink/orange).
- What does circuit 601 LB/PK feed?
- Circuit 601 (LB/PK) feeds the 4WABS Relay #1 in the Trailer Relay Box and the 4WABS Control Module via connector C119 pin 20, both referenced to page 42-1.
- Which connector goes to the speed control servo/amplifier?
- Connector C152, pin 7, feeds the Speed Control Servo/Amplifier Assembly (page 31-1) on circuit 298 P/O.
- Is the Daytime Running Lamps module on this circuit?
- Yes: with DRL, circuit 298 P/O runs through connector C177 pin 3 to the DRL Module (page 97-1).
No comments yet.