Ford 302 & 351 SVO Cylinder Block Rear View Dimensions Diagram

This document is a scanned engineering-style dimensional drawing of a Ford small-block V8 cylinder block, shown from the rear view. The caption states it is a combined view representing both the 302 and 351 SVO cylinder blocks, with the left bank labeled as typical of the 351 SVO and the right bank labeled as typical (label partially cut off, presumably of the 302). The drawing gives locating dimensions for bolt holes, bosses, and features on the rear (bellhousing) face of the block, including values such as 9.77, 7.220, 4.67, 5.53, 14.10, 14.960, .56, 15.47, 2.900, and 5.25 inches, measured from datum lines (marked 0) at the edges of the block. Certain hole locations have been highlighted with pink/red and blue markers by the uploader, likely to identify specific bellhousing or accessory mounting holes of interest. A reader can use this drawing to locate and compare rear-face hole positions between the 302 and 351 SVO blocks, useful for bellhousing fitment, engine swap planning, or fabricating adapters. Some dimensions at the left and right edges are cropped and only partially legible.