What amperage is the START fuse on a 2010 Genesis Coupe?

The START fuse in the I/P Junction Box is rated 10A and is hot in start; it feeds the ignition lock switch (with immobilizer) or the B/ALARM relay in the ICM relay box (without immobilizer).

What fuses power the power windows on the 2010 Genesis Coupe?

P/WDW (RH) 25A feeds the passenger safety window module and P/WDW (LH) 25A feeds the driver safety window module, both from the I/P Junction Box on 'hot at all times' power.

Which fuse feeds the start/stop button switch and fob holder?

The ESCL SW 10A fuse feeds both the fob holder (connector M26, pins 8 and 5) and the start/stop button switch (connector M57, pins 6 and 2).

What fuse and relay control the hazard circuit?

The HAZARD 10A fuse feeds the hazard switch (pin 7 of connector M12) and the hazard relay (with B/ALARM) located in the ICM relay box via connector M13-B.

What size is the amplifier (AMP) fuse and what wire color does it use?

The AMP fuse is 20A; it feeds the amplifier through G/Y (green/yellow) wires to connector F03-B pins 2, 1 and 3.

Home/ Registry/ Hyundai/ Genesis/ “Coupe”/ Photo supermotors.net/registry/media/1168704

2010 Hyundai Genesis Coupe Push-Button Start & Interior Fuse Wiring Diagram

2010 Genesis Coupe ETM wiring diagram with relays, modules and color-coded wires

‹ ›

Wiring diagram from the 2010 Genesis Coupe electrical troubleshooting manual showing relays, control modules, fuses and color-coded circuits.

AI caption February 2022 · Photo 966 of 981

This document is page 21 of 215 from the 2010 Hyundai Genesis Coupe Electrical Troubleshooting Manual (ETM), viewed in Macromedia FlashPaper. It is a power distribution wiring diagram for circuits fed from the I/P (instrument panel) Junction Box, showing 'HOT AT ALL TIMES' and 'HOT IN START' feeds. Fuses shown include T/LID OPEN 15A, AMP 20A, HAZARD 10A, ESCL (PDM-A) 25A, P/WDW (RH) 25A, P/WDW (LH) 25A, ESCL (PDM-B) 10A, ESCL SW 10A, and START 10A. The diagram traces wire colors (W, G/Y, R, R/O, R/B, P) and connector pins (e.g., FD11, M12, M13-B, MF31, FD21, D10, D17, D07, M51-A, M51-B, M14-A, M26, M57, EM21, E23, F03-B) down to their loads: the trunk lid & fuel filler door switch, amplifier, hazard switch and hazard relay (in the ICM relay box), PDM, passenger and driver safety window modules, smart key control module, fob holder, start/stop button switch, ignition lock switch, and B/ALARM relay. The START 10A circuit branches by configuration: 'With IMMO.' feeds the ignition lock switch, 'W/O IMMO.' feeds the B/ALARM relay. Copyright 2009 Hyundai Motor America.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What amperage is the START fuse on a 2010 Genesis Coupe?: The START fuse in the I/P Junction Box is rated 10A and is hot in start; it feeds the ignition lock switch (with immobilizer) or the B/ALARM relay in the ICM relay box (without immobilizer).
What fuses power the power windows on the 2010 Genesis Coupe?: P/WDW (RH) 25A feeds the passenger safety window module and P/WDW (LH) 25A feeds the driver safety window module, both from the I/P Junction Box on 'hot at all times' power.
Which fuse feeds the start/stop button switch and fob holder?: The ESCL SW 10A fuse feeds both the fob holder (connector M26, pins 8 and 5) and the start/stop button switch (connector M57, pins 6 and 2).
What fuse and relay control the hazard circuit?: The HAZARD 10A fuse feeds the hazard switch (pin 7 of connector M12) and the hazard relay (with B/ALARM) located in the ICM relay box via connector M13-B.
What size is the amplifier (AMP) fuse and what wire color does it use?: The AMP fuse is 20A; it feeds the amplifier through G/Y (green/yellow) wires to connector F03-B pins 2, 1 and 3.

Comments

No comments yet.

More from this build

Cooling-fan wiring diagram for Theta 2.0 TCI engine with fan relays, fuses and coolant sensor

Cooling System wiring diagram for Lambda II 3.8 GDI engine with fan relays, fuses and sensor

Service photo labeling instrument-panel wiring connectors I/P-A to I/P-K and Z01 diode

Wiring diagram legend of wire color codes, harness and connector identification

Service manual figure Photo.59 with callouts to PDM modules and rear parking assist buzzer

Service manual figure labeling BCM connectors, in-car temp sensor and TPMS module

Close-up of Hyundai Genesis coupe engine bay showing intake manifold, sensors, hoses, and a yellow wire.

Starting system wiring diagram with battery, start relays, solenoid and motor, ignition switch and color-coded wires

All 1054 photos of this build

More Hyundai Genesiss

2010 Hyundai Genesis51 photos

The Hyundai Genesis registry