DIY Tilting Carrier Concept Sketch with 12V Winch & Pivot - Ford Bronco

This document is a simple hand-drawn schematic sketch, uploaded as 'carrier.jpg' to a 1979 Ford Bronco gallery, showing a conceptual design for a tilting carrier or loading mechanism. The drawing depicts a large cylindrical or rounded rectangular object (drawn in heavy black outline, apparently a tank, drum, or similar load) resting at an angle on a long horizontal flat platform or rail. A red box on the platform is labeled '12V winch', with a red line running from the winch up to an attachment point (marked with a red dot) on the tilted object, indicating a winch cable used to pull or raise the load. A black dot at the left end of the platform, where the tilted object meets it, is labeled 'pivot' (annotated in blue), showing the hinge point about which the object rotates as the winch pulls. A large circle below the platform likely represents a wheel or tire. The only text in the document consists of the two labels '12V winch' and 'pivot'; there are no dimensions, part numbers, torque specs, wire colors, or year/model information. A reader can learn the basic operating concept: a 12-volt winch mounted on the platform pulls a cable to tilt a load about a pivot point at the platform's edge.