What do the K-locks shown in Figure 8-A do?

The K-locks are shown along the top body rail in detail 8-A and are used to secure the soft top fabric to the vehicle during fabric installation.

How does the fabric edge attach according to Figure 8-B?

Detail 8-B shows the fabric wrapped around a plastic strip ('Fabric Wrapped arround plastic' / 'Plastic wrapped in fabric'), which then seats into the channel on the body rail.

What does Figure 9 show?

Figure 9 gives the folding instructions for the soft top in five numbered steps (#1 through #5), showing the top being folded from the raised position down to fully collapsed at the rear of the vehicle.

What page and document number is this?

The page is marked 'Pg 8 334-310' in the lower right corner, indicating it is page 8 of instruction set 334-310.

Home/ Registry/ Ford/ Bronco/ 1987-1991/ 1991 Ford Bronco/ Photo supermotors.net/registry/media/503394

Ford Bronco Soft Top Fabric Installation & Folding Instructions - Pg 8 334-310

Fabric installation and top folding instructions with numbered steps and figures

‹ ›

Step-by-step fabric installation and folding instructions with numbered steps and accompanying figures.

AI caption April 2007 · Photo 149 of 167

This document is page 8 of a soft top installation instruction set (marked "Pg 8 334-310"), scanned from a printed manual and uploaded to a 1991 Ford Bronco gallery. It contains two illustrated sections. The first, "Fabric Installation" (Figure 8), shows a Bronco-style SUV body with a rear bed rail; detail bubble 8-A points out the "K-locks" that secure the fabric along the top of the body rail, and detail bubble 8-B shows a cross-section labeled "Fabric Wrapped arround plastic" and "Plastic wrapped in fabric," illustrating how the fabric-wrapped plastic edge seats into the retaining channel. The second section, "Folding Instruction" (Figure 9), uses a sequence of numbered drawings (#1 through #5) showing how to fold the soft top down: releasing and folding the rear and side sections (#1–#3), then progressively collapsing the frame rearward until the top lies fully folded at the back of the vehicle (#4 and #5). The page is almost entirely diagram-based, with minimal text; readers learn how the fabric edge attaches via K-locks and wrapped plastic strips, and the correct fold-down sequence for stowing the top.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What do the K-locks shown in Figure 8-A do?: The K-locks are shown along the top body rail in detail 8-A and are used to secure the soft top fabric to the vehicle during fabric installation.
How does the fabric edge attach according to Figure 8-B?: Detail 8-B shows the fabric wrapped around a plastic strip ('Fabric Wrapped arround plastic' / 'Plastic wrapped in fabric'), which then seats into the channel on the body rail.
What does Figure 9 show?: Figure 9 gives the folding instructions for the soft top in five numbered steps (#1 through #5), showing the top being folded from the raised position down to fully collapsed at the rear of the vehicle.
What page and document number is this?: The page is marked 'Pg 8 334-310' in the lower right corner, indicating it is page 8 of instruction set 334-310.