1978 Ford Bronco Roll Cage Rear View Diagram - Diagonal Brace Layout Sketch

This document is a minimal, hand-drawn style line schematic with no text, labels, dimensions, or part numbers of any kind. It depicts what appears to be the rear (back) view of a roll cage or cage structure, consistent with its filename 'cageback.jpg' and companion files in the same album (basiccage2.jpg, cagefront.jpg, cageside.jpg). The drawing shows a squared, open-bottom frame, a horizontal top bar joined to two vertical uprights, with a single diagonal brace running from the lower end of the left upright to the upper right corner. This diagonal member likely represents a rear cross-brace for the cage structure. Because the drawing carries no measurements, tube sizes, angles, callouts, or year/model identification, a reader can learn only the general geometric arrangement of the rear bracing: one diagonal brace spanning corner-to-corner within the rear hoop plane. The document was uploaded to a 1978 Ford Bronco gallery, and nothing in the drawing contradicts that attribution, but the drawing itself contains no vehicle-identifying information. Anyone seeking dimensions or fabrication specifications would need the other pages of the set or additional documentation.